Cisco Meraki MR46 / MR46E Access Points - Refurbished, Used, New

Sort by

The Cisco Meraki MR46 and MR46E are high-performance Wi-Fi 6 (802.11ax) indoor access points managed from the Meraki cloud dashboard, with four spatial streams on both 2.4 GHz and 5 GHz, a 2.5 Gbps multigigabit uplink and a dedicated radio that scans full time for security threats. They are built for the densest indoor spaces: open-plan offices, lecture halls, conference centers, hospitals and large retail floors. The MR46 has internal antennas; the MR46E takes external antennas for high ceilings and aimed coverage. NetworkTigers sells the MR46-HW and MR46E-HW refurbished, used and new, unclaimed so you can claim them into your own Meraki organization, tested by our technicians and backed by a 365-day warranty.

Key specifications

Dual-band Wi-Fi 6: 4x4:4 on 2.4 GHz and 4x4:4 on 5 GHz, up to 2.98 Gbps combined radio rate
Dedicated dual-band scanning radio for 24x7 WIDS/WIPS, plus a Bluetooth Low Energy radio
One multigigabit Ethernet port (RJ45): 100 Mbps, 1 Gbps or 2.5 Gbps
Power: 802.3at PoE+, 30 W maximum, or a 12 V DC adapter
MR46 internal antennas: 5.4 dBi at 2.4 GHz, 6 dBi at 5 GHz
MR46E: six external antenna connections; compatible with MA-ANT-3-A6, B6, C6, D6, E6 and F6. Check each listing for included antennas.
Meraki license required, sold separately

Cisco lists December 31, 2026 as end of sale and December 31, 2031 as end of support for both models.

MR46 or MR46E?

MR46: internal antennas, ceiling, wall or desk mount. The choice for offices, classrooms and meeting spaces.
MR46E: the same radios with external antenna connections. Pair it with omnidirectional or patch antennas for warehouses, gyms, auditoriums and other high-ceiling or oddly shaped spaces.

If you need 4x4 on 5 GHz but only 2x2 on 2.4 GHz, see the MR44. For outdoor coverage, see MR76.

Frequently asked questions

Will the MR46 run on a standard 802.3af PoE switch?
No. Meraki specifies 802.3at PoE+ for the MR46 and MR46E. Use a PoE+ switch, a PoE+ injector or a compatible 12 V DC adapter, sold separately.

What antennas does the MR46E need?
Use a compatible six-connection MA-ANT-3 antenna set so all six ports are connected. Choose the antenna pattern for the room: omnidirectional for broad coverage, or a suitable patch antenna where coverage must be aimed. Antennas are sold separately unless the individual listing says they are included. See our Meraki antennas.

The MR46E mounts with the MA-MNT-MR-18 kit, listed on this page; the MR46 uses the MA-MNT-MR-15 kits listed with the MR44.

See all Meraki wireless access points, or ask us for a quote on larger quantities.