{"title":"Arista 7050 Versatile Leaf Switches - Refurbished, Used, and New","description":"\u003cp\u003eThe Arista 7050 Series is a family of fixed-configuration Layer 2\/Layer 3 data center switches for leaf and spine deployments, running Arista EOS. The 7050X models (7050SX, 7050TX and 7050QX) are 1RU and 2RU 10G and 40G switches with up to 2.56 Tbps of switching capacity. The 7050X3 models add 25G and 100G ports, up to 6.4 Tbps of capacity and a 32 MB shared packet buffer. This collection also covers the earlier 7050S, 7050T and 7050Q models. NetworkTigers stocks these switches refurbished, used, and new, every unit tested before it ships so it works when it arrives.\u003c\/p\u003e\n\n\u003cp\u003eUse the table below to find your model family and compare port types, speeds, and switching capacity.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePorts\u003c\/th\u003e\n\u003cth\u003eSwitching Capacity\u003c\/th\u003e\n\u003cth\u003eBuy\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050S\u003c\/td\u003e\n\u003ctd\u003eSFP+ ports for 10G (7050S-52, 7050S-64); port count and uplinks vary by model, check the listing\u003c\/td\u003e\n\u003ctd\u003eCheck the listing\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/search?q=7050S-52\"\u003eShop 7050S-52\u003c\/a\u003e \u003ca href=\"\/search?q=7050S-64\"\u003eShop 7050S-64\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050T\u003c\/td\u003e\n\u003ctd\u003e10GBASE-T copper ports (7050T-36, 7050T-52, 7050T-64); port count and uplinks vary by model, check the listing\u003c\/td\u003e\n\u003ctd\u003eCheck the listing\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/search?q=7050T-36\"\u003eShop 7050T-36\u003c\/a\u003e \u003ca href=\"\/search?q=7050T-52\"\u003eShop 7050T-52\u003c\/a\u003e \u003ca href=\"\/search?q=7050T-64\"\u003eShop 7050T-64\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050Q\u003c\/td\u003e\n\u003ctd\u003eQSFP+ 40G ports (7050Q-16); check the listing for the full port list\u003c\/td\u003e\n\u003ctd\u003eCheck the listing\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050Q-16\"\u003eShop 7050Q-16\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050SX \/ 7050SX2\u003c\/td\u003e\n\u003ctd\u003eSFP+ ports for 1G\/10G, with QSFP+ or MXP uplinks (port count varies by model, check the listing)\u003c\/td\u003e\n\u003ctd\u003eUp to 2.56 Tbps\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/search?q=7050SX-\"\u003eShop 7050SX\u003c\/a\u003e \u003ca href=\"\/search?q=7050SX2\"\u003eShop 7050SX2\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050TX \/ 7050TX2\u003c\/td\u003e\n\u003ctd\u003e10GBASE-T ports for 100M\/1G\/10G, with QSFP+ or MXP uplinks (port count varies by model, check the listing)\u003c\/td\u003e\n\u003ctd\u003eUp to 2.56 Tbps\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/search?q=7050TX-\"\u003eShop 7050TX\u003c\/a\u003e \u003ca href=\"\/search?q=7050TX2\"\u003eShop 7050TX2\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050QX-32 \/ 7050QX-32S \/ 7050QX2-32S\u003c\/td\u003e\n\u003ctd\u003e32x 40G QSFP+ (each usable as 4x 10G); the -32S models add 4x 10G SFP+\u003c\/td\u003e\n\u003ctd\u003e2.56 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050QX\"\u003eShop 7050QX\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050CX3-32S \/ 7050CX3-32S-D (expanded memory)\u003c\/td\u003e\n\u003ctd\u003e32x 100G QSFP, 2x 10G SFP\u003c\/td\u003e\n\u003ctd\u003e6.4 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050CX3-32S\"\u003eShop 7050CX3-32S\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050CX3M-32S\u003c\/td\u003e\n\u003ctd\u003e32x 100G QSFP, 2x 10G SFP, MACsec\u003c\/td\u003e\n\u003ctd\u003e6.4 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050CX3M-32S\"\u003eShop 7050CX3M-32S\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050SX3-48YC8\u003c\/td\u003e\n\u003ctd\u003e48x 25G SFP, 8x 100G QSFP\u003c\/td\u003e\n\u003ctd\u003e4.0 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050SX3-48YC8\"\u003eShop 7050SX3-48YC8\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050SX3-48YC12\u003c\/td\u003e\n\u003ctd\u003e48x 25G SFP, 12x 100G QSFP\u003c\/td\u003e\n\u003ctd\u003e4.8 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050SX3-48YC12\"\u003eShop 7050SX3-48YC12\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050SX3-48C8\u003c\/td\u003e\n\u003ctd\u003e48x 10G SFP+, 8x 100G QSFP\u003c\/td\u003e\n\u003ctd\u003e2.56 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050SX3-48C8\"\u003eShop 7050SX3-48C8\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050SX3-96YC8 (2RU)\u003c\/td\u003e\n\u003ctd\u003e96x 25G SFP, 8x 100G QSFP\u003c\/td\u003e\n\u003ctd\u003e6.4 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050SX3-96YC8\"\u003eShop 7050SX3-96YC8\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7050TX3-48C8\u003c\/td\u003e\n\u003ctd\u003e48x 10G RJ45, 8x 100G QSFP\u003c\/td\u003e\n\u003ctd\u003e2.56 Tbps\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/search?q=7050TX3-48C8\"\u003eShop 7050TX3-48C8\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelated Arista\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7050 family pages and the wider Arista range\u003c\/td\u003e\n\u003ctd\u003eSee each page\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/arista-7050sx-switches-refurbished-used-and-new\"\u003e7050SX\u003c\/a\u003e | \u003ca href=\"\/collections\/arista-7050tx-switches-refurbished-used\"\u003e7050TX\u003c\/a\u003e | \u003ca href=\"\/collections\/arista-7050q-switches-refurbished-used-and-new\"\u003e7050Q\u003c\/a\u003e | \u003ca href=\"\/collections\/arista-7050x3-switches\"\u003e7050X3\u003c\/a\u003e | \u003ca href=\"\/collections\/arista-standard-data-leaf-switches-refurbished-used-new\"\u003eStandard Data Leaf\u003c\/a\u003e | \u003ca href=\"\/collections\/arista\"\u003eAll Arista\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003ePower supplies, fan modules, and rack kits for the 7050 are sold in this collection too. Check each listing for the exact part and the switch it fits.\u003c\/p\u003e\n\n\u003ch2\u003eWhich 7050 do I need?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eServer port type:\u003c\/strong\u003e S, SX and SX3 models use SFP+ or SFP ports for fiber or DAC cabling. T, TX and TX3 models use 10GBASE-T copper over RJ45. SX3 models with \"YC\" in the name use 25G SFP ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUplink speed:\u003c\/strong\u003e The 7050SX and 7050TX models use 40G QSFP+ (or MXP) uplinks. The 7050QX is an all-40G switch for spine or aggregation use. The X3 models have 100G QSFP uplinks, and the 7050CX3 models are 32x 100G throughout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarlier models:\u003c\/strong\u003e The 7050S, 7050T and 7050Q are the earlier 7050 models. Their port counts and uplinks vary, so check the listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e Most 7050 models come in -F and -R versions. -F units move air front to back (port side intake). -R units move air back to front (port side exhaust). Match the airflow of your hot and cold aisles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort count:\u003c\/strong\u003e The number in a model name does not always match the physical ports, so check the port list in the title and listing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoining an existing network:\u003c\/strong\u003e If the switch will join an MLAG pair or an existing fabric, ask us to check software compatibility before you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan the 25G SFP ports on a 7050X3 run at 10G?\u003c\/strong\u003e\u003cbr\u003eYes. Arista describes the 7050X3 SFP ports as dual-mode 10G\/25G, so existing 10G optics and cables can be reused during a move to 25G.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I split the 40G or 100G ports into smaller links?\u003c\/strong\u003e\u003cbr\u003eYes. Arista lists 4x 10G breakout on the 7050QX 40G ports, and quad 10G and 25G support on the 7050X3 100G ports. The number of usable ports depends on the model.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cp\u003ePower supplies and fans ship with a switch when its title names an airflow direction (F-B or B-F); the listing's What's Included section names the exact parts. Otherwise they are sold separately so you can choose AC or DC input and the airflow. Optics are always sold separately.\u003c\/p\u003e\n\n\u003cp\u003eNetworkTigers has been supplying tested networking hardware since 1996. Every unit carries a 365-day warranty. \u003ca href=\"\/pages\/ask-for-quote\"\u003eAsk us for a quote\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"dcs-7050s-64-r-arista-switch","title":"Arista DCS-7050S-64-R 48x 10GB SFP+ 4x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eForty-eight 1\/10GbE SFP+ ports and four 40GbE QSFP+ uplinks give the DCS-7050S-64-R a classic top-of-rack layout in 1RU. It belongs to the original 7050 series. Breaking out the QSFP+ ports to 4x 10GbE yields as many as 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.28 Tbps at 960 Mpps. Latency is 800 to 1150 nanoseconds on the SFP+ ports and 950 to 1350 nanoseconds on QSFP+, with a 9 MB shared buffer. It carries 4 GB of DRAM and 2 GB of flash, and a 50 GB SSD was offered on a separate variant.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). Arista also sells a front-to-back (-F) version, so pick the one the rack needs. Two 460W AC supplies come installed, 1+1 hot-swap, and the spares are PWR-460AC-R and PWR-460DC-R. Four FAN-7000-R fans run N+1, hot-swappable. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 125W and 220W. It weighs 17 lb at 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-64-f-arista-switch\"\u003eDCS-7050S-64-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-64-r-arista-switch-new\"\u003eDCS-7050S-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050S-64-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":25702245126,"sku":"NSH-3467","price":166.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050S-64-R.jpg?v=1686071022"},{"product_id":"dcs-7050t-64-r-arista-switch","title":"Arista DCS-7050T-64-R 48x 10GB Copper 4x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eWith 48 10GBASE-T RJ-45 ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks, the DCS-7050T-64-R pairs copper server access with 40GbE connections to the aggregation layer. It is a 1RU switch from the original 7050 series, and QSFP+ breakout supports up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.28 Tbps and 960 Mpps. Latency is 3.3 microseconds on copper and 950 to 1350 nanoseconds on QSFP+, with a 9 MB shared buffer. It has 4 GB of DRAM and 2 GB of flash; the -D variant added a 50 GB SSD.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so choose the direction your rack uses. Two AC power supplies are installed in 1+1 hot-swap; 460W PWR-460AC-R and PWR-460DC-R are listed as spares. Four FAN-7000-R fans run N+1, hot-swappable. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 322W and 422W. It weighs 20.9 lb at 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-f-arista-switch\"\u003eDCS-7050T-64-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-r-arista-switch-new\"\u003eDCS-7050T-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050T-64-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":26811607046,"sku":"NSH-5258","price":484.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-64-R-2.jpg?v=1783409372"},{"product_id":"dcs-7050s-52-f-arista-switch","title":"Arista DCS-7050S-52-F 7050S Series 52x 10GB SFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050S-52-F is a 1RU 10GbE switch from the original 7050 series, with 52 SFP+ ports that each run at 1GbE or 10GbE. There is no separate uplink group, so any port can serve as an uplink.\u003c\/p\u003e\u003cp\u003eCapacity is 1.04 Tbps at 780 Mpps, with latency of 800 to 1150 nanoseconds and a 9 MB shared packet buffer. The control plane has 4 GB of DRAM and 2 GB of flash. A 50 GB SSD was offered on a separate variant.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 460W AC power supplies run 1+1 hot-swap, with PWR-460AC-F and PWR-460DC-F as spares. Four hot-swap FAN-7000-F fans run N+1. Keep every fan and supply on the same airflow. Arista lists typical and maximum draw of 103W and 185W. The switch is 19 x 16 x 1.75 inches and 17 lb, with a 100\/1000 management port, RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-52-r-arista-switch\"\u003eDCS-7050S-52-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-52-f-arista-switch-new\"\u003eDCS-7050S-52-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050S-52-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":26811610886,"sku":"NSH-2686","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050S-52-F.jpg?v=1686070920"},{"product_id":"dcs-7050s-64-f-arista-switch","title":"Arista DCS-7050S-64-F 48x 10GB SFP+ 4x 40GB QSFP+ F-to-B 2xAC Airflow Switch","description":"\u003cp\u003eThe DCS-7050S-64-F is a 1RU top-of-rack switch from the original 7050 series. It has 48 SFP+ ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks. Each QSFP+ port breaks out to four 10GbE links, for up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.28 Tbps at 960 Mpps. Arista lists latency of 800 to 1150 nanoseconds on SFP+ and 950 to 1350 nanoseconds on QSFP+, with a 9 MB shared buffer. Memory is 4 GB of DRAM and 2 GB of flash; a separate variant added a 50 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 460W AC power supplies run 1+1 hot-swap, with PWR-460AC-F and PWR-460DC-F as spares. Cooling is four hot-swap FAN-7000-F fans in N+1. Keep fans and supplies on the same airflow direction. Typical and maximum draw are 125W and 220W. The switch is 19 x 16 x 1.75 inches and weighs 17 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-64-r-arista-switch\"\u003eDCS-7050S-64-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-64-f-arista-switch-new\"\u003eDCS-7050S-64-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050S-64-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":26811613574,"sku":"NSH-5256","price":2702.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050S-64-F.jpg?v=1686070988"},{"product_id":"dcs-7050s-52-r-arista-switch","title":"Arista DCS-7050S-52-R 7050S Series 52x 10GB SFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eFifty-two SFP+ ports at 1GbE or 10GbE make the DCS-7050S-52-R a straightforward all-fiber access switch in 1RU. It comes from the original 7050 series. No ports are reserved for uplinks; any of the 52 can connect upstream.\u003c\/p\u003e\u003cp\u003eThe switch handles 1.04 Tbps and 780 Mpps. Latency is 800 to 1150 nanoseconds, and a 9 MB packet buffer is shared across all ports. It has 4 GB of DRAM and 2 GB of flash, and a separate variant added a 50 GB SSD.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so confirm which way the rack runs. Two 460W AC supplies are installed in 1+1 hot-swap; replacements are PWR-460AC-R or PWR-460DC-R. Four FAN-7000-R fans run N+1 and can be swapped hot. All fans and supplies must share one airflow direction. Typical draw is 103W and maximum is 185W. The chassis weighs 17 lb and measures 19 x 16 x 1.75 inches. Management uses 100\/1000 Ethernet, an RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-52-f-arista-switch\"\u003eDCS-7050S-52-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050s-52-r-arista-switch-new\"\u003eDCS-7050S-52-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050S-52-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27622551878,"sku":"NSH-5257","price":162.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050S-52-R.jpg?v=1686070953"},{"product_id":"pwr-750ac-f-arista-power-supply","title":"Arista PWR-750AC-F 7050SX Series 750W AC F-B Air (Red) Switch Power Supply","description":"\u003cp\u003eThe PWR-750AC-F is a spare 750W AC power supply for the Arista 7050SX-128 and the 7050TX-128 family of 2RU switches. These high-density 10G switches need more power than the 1RU 7050X models, and this supply is sized for them.\u003c\/p\u003e\u003cp\u003eInput is 100 to 240V AC, so the supply works from standard 120V outlets as well as high-line circuits. Arista rates efficiency at 94% typical, Platinum level.\u003c\/p\u003e\u003cp\u003eThis version moves air front-to-back (port-side intake). Arista also sells the opposite airflow version, the PWR-750AC-R. Match it to every fan module in the switch and to the rack's hot and cold aisles, because a supply moving air the wrong way works against the system fans.\u003c\/p\u003e\u003cp\u003eWith two supplies installed, one can be replaced while the other carries the load. Do not confuse it with the PWR-745AC supplies, which fit 7060X and 7280QR switches. Check the part number and airflow on the installed supply before ordering a spare.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-r-arista-power-supply\"\u003ePWR-750AC-R power supply\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-f-arista-power-supply-new\"\u003ePWR-750AC-F\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eBecause the unit is hot-swappable, you can replace a failed supply in a redundant pair without powering the switch down. Install it while the other supply carries the load, then confirm both supplies show as healthy.\u003c\/p\u003e\u003cp\u003eThis seller refurbished PWR-750AC-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27622681478,"sku":"NSH-5269","price":367.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-PWR-750AC-F.jpg?v=1686072768"},{"product_id":"dcs-7050tx-64-r-arista-switch","title":"Arista DCS-7050TX-64-R 48x 10GB Copper 4x 40GB QSFP+ Back-to-Front Air Switch","description":"\u003cp\u003eForty-eight 10GBASE-T RJ-45 ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks give the DCS-7050TX-64-R a full rack of copper access in 1RU. It belongs to the 7050X family, and QSFP+ breakout raises the count to as many as 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.28 Tbps at 960 Mpps. Latency is 3 microseconds, with a 12 MB shared buffer using dynamic allocation. Memory is 4 GB of DRAM and 4 GB of flash, and a 120 GB SSD is optional.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so pick the direction the rack needs. Two 500W AC power supplies are installed in 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Every fan and supply must share one airflow direction. Typical and maximum draw are 315W and 387W. It weighs 19 lb and measures 19 x 15.8 x 1.75 inches. There is a 10\/100\/1000 management port, an RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-64-f-arista-switch\"\u003eDCS-7050TX-64-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-64-r-arista-switch-new\"\u003eDCS-7050TX-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-64-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27622725574,"sku":"NSH-2518","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX-64-R.jpg?v=1686071296"},{"product_id":"dcs-7050qx-32-r-arista-switch","title":"Arista DCS-7050QX-32-R 32x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eThirty-two 40GbE QSFP+ ports fill the front of the DCS-7050QX-32-R, a 1RU member of the 7050X family. Breakout cabling turns those into as many as 96 10GbE ports. There are no SFP+ ports on this model, which separates it from the 7050QX-32S.\u003c\/p\u003e\u003cp\u003eIt switches 2.56 Tbps at 1.44 Bpps, with latency of 550 nanoseconds and a 12 MB packet buffer. If you enable the 10GbE low-latency mode, eight QSFP+ ports are disabled. Memory is 4 GB of DRAM with 4 GB of flash, and an optional 100 GB SSD was available.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). Arista also sells a front-to-back (-F) version, so confirm the rack's direction before ordering. Power comes from two 460W AC supplies in 1+1 hot-swap. The 7050QX-32 uses a different supply from most other 1RU 7050X switches, and the spare part is PWR-460AC-R. Cooling is N+1 hot-swap with FAN-7000-R fans. All fans and supplies must match in airflow. For management there is Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-f-arista-switch\"\u003eDCS-7050QX-32-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-r-arista-switch-new\"\u003eDCS-7050QX-32-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX-32-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27622768198,"sku":"NSH-2624","price":166.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX-32-R.jpg?v=1686070686"},{"product_id":"dcs-7050qx-32s-r-arista-switch","title":"Arista DCS-7050QX-32S-R 32x 40GB QSFP+ 4x 10GB SFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eWith 32 QSFP+ ports at 40GbE and four 10GbE SFP+ ports, the DCS-7050QX-32S-R covers 40GbE spine or leaf duty in 1RU. Breakout cables extend it to as many as 96 10GbE ports, and the four SFP+ ports handle 10GbE links without consuming a QSFP+ port.\u003c\/p\u003e\u003cp\u003eThe switch delivers 2.56 Tbps and 1440 Mpps with 550 nanoseconds of latency. Its 12 MB shared buffer uses dynamic buffer allocation. The control plane has 4 GB of DRAM, 4 GB of flash, and an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the one that suits the rack. Two 500W AC supplies come installed in 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 150W and 302W. It is 19 x 16 x 1.75 inches and 20 lb, with a 10\/100\/1000 management port, RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-f-arista-switch\"\u003eDCS-7050QX-32S-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-r-arista-switch-new\"\u003eDCS-7050QX-32S-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX-32S-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27622782598,"sku":"NSH-3060","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX-32S-R.jpg?v=1686070786"},{"product_id":"dcs-7050qx-32-f-arista-switch","title":"Arista DCS-7050QX-32-F 32x 40GB QSFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050QX-32-F is a 1RU 7050X switch with 32 QSFP+ ports at 40GbE and no SFP+ ports. With breakout cables it supports up to 96 10GbE links.\u003c\/p\u003e\u003cp\u003eCapacity is 2.56 Tbps at 1.44 Bpps, with 550 nanoseconds of latency and a 12 MB packet buffer. In 10GbE low-latency mode, eight of the QSFP+ ports are disabled. The control plane has 4 GB of DRAM and 4 GB of flash, and Arista offered an optional 100 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. It uses two 460W AC power supplies in 1+1 hot-swap, a different supply from the rest of the 1RU 7050X line; the spare is PWR-460AC-F. Fans are N+1 hot-swap FAN-7000-F modules. Keep every fan and supply on the same airflow direction. Management is through Ethernet 100\/1000, an RS-232 console, and USB 2.0. This model has no SFP+ ports, unlike the 7050QX-32S.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-r-arista-switch\"\u003eDCS-7050QX-32-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-f-arista-switch-new\"\u003eDCS-7050QX-32-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX-32-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":27623012486,"sku":"NSH-2519","price":192.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX-32-F.jpg?v=1686070653"},{"product_id":"dcs-7050t-52-f-arista-switch","title":"Arista DCS-7050T-52-F 48x 10GB Copper 4x 10GB SFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050T-52-F is a 1RU top-of-rack switch from the original 7050 series, with 48 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and four 10GbE SFP+ uplinks. It connects a full rack of copper-attached servers without optics on the access side.\u003c\/p\u003e\u003cp\u003eCapacity is 1.04 Tbps at 780 Mpps. Arista lists latency of 3.3 microseconds on the RJ-45 ports and 800 to 1150 nanoseconds on the SFP+ uplinks, with a 9 MB shared packet buffer. Memory is 4 GB of DRAM and 2 GB of flash, and a 50 GB SSD was offered on the -D variant.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC supplies run 1+1 hot-swap, with 460W spares listed as PWR-460AC-F and PWR-460DC-F. Four hot-swap FAN-7000-F fans run N+1. Keep fans and supplies on the same airflow. Typical and maximum draw are 301W and 395W. The switch weighs 20.9 lb and measures 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-52-r-arista-switch\"\u003eDCS-7050T-52-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-52-f-arista-switch-new\"\u003eDCS-7050T-52-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050T-52-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":40403423174,"sku":"NSH-2240","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-52_171ffa89-4748-4878-9808-fbe454e33745.jpg?v=1743708334"},{"product_id":"dcs-7050sx-64-r-arista-switch","title":"Arista DCS-7050SX-64-R 48x 10GB SFP+ 4x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eA 7050X-generation top-of-rack switch, the DCS-7050SX-64-R puts 48 SFP+ ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks in 1RU. Breakout on the QSFP+ ports gives up to 64 10GbE ports in total.\u003c\/p\u003e\u003cp\u003eIt switches 1.28 Tbps at 960 Mpps with 550 nanoseconds of latency, lower than the earlier 7050S. A 12 MB shared buffer with dynamic allocation absorbs bursts. Memory is 4 GB of DRAM and 4 GB of flash, and an SSD was offered on a separate variant.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the direction that fits the rack. Two 500W AC power supplies run 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Fans and supplies must all share the same airflow. Typical and maximum draw are 140W and 220W. It weighs 19 lb and measures 19 x 16 x 1.75 inches. Ports for management are 10\/100\/1000 Ethernet, an RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-f-arista-switch\"\u003eDCS-7050SX-64-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-r-arista-switch-new\"\u003eDCS-7050SX-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-64-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":52623625990,"sku":"NSH-6118","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-64-R-2.jpg?v=1783409133"},{"product_id":"dcs-7050qx-32s-f-arista-switch","title":"Arista DCS-7050QX-32S-F 32x 40GB QSFP+ 4x 10GB SFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050QX-32S-F is a 1RU 7050X switch with 32 QSFP+ ports at 40GbE and four 10GbE SFP+ ports. Using breakout cables, it reaches up to 96 10GbE ports. The SFP+ ports handle 10GbE links without using a QSFP+ port.\u003c\/p\u003e\u003cp\u003eArista rates it at 2.56 Tbps and 1440 Mpps with 550 nanoseconds of latency. A 12 MB shared buffer uses dynamic buffer allocation. Memory is 4 GB of DRAM and 4 GB of flash, with an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 500W AC power supplies run 1+1 hot-swap, with PWR-500AC-F and PWR-500-DC-F as spares. Four hot-swap FAN-7000-F fans provide N+1 cooling. Keep fans and supplies on one airflow direction. Typical and maximum draw are 150W and 302W. The switch weighs 20 lb and measures 19 x 16 x 1.75 inches. Management ports are 10\/100\/1000 Ethernet, RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-r-arista-switch\"\u003eDCS-7050QX-32S-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-f-arista-switch-new\"\u003eDCS-7050QX-32S-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX-32S-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":478692245510,"sku":"NSH-6229","price":317.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX-32S-F.jpg?v=1686070753"},{"product_id":"fan-7000-r-arista-fan-module-new","title":"NEW Arista FAN-7000-R B-F Fan Module for for 7048, 7050, 7124SX, 7150 Series","description":"\u003cp\u003eThe FAN-7000-R is a spare fan module that fits a wide range of Arista fixed switches. Compatible models include the 7124SX and 7124FX, the 7150, the 7048-A, the first-generation 7050 and the 7050X 1RU models, the 7060CX, the 7280 and the 720XP.\u003c\/p\u003e\u003cp\u003eBecause it covers so many platforms, it is a practical spare for sites running a mix of older and newer Arista 1RU switches. One fan module part can cover many switches in the same rack row.\u003c\/p\u003e\u003cp\u003eThis version moves air back-to-front (port-side exhaust). Arista also sells the opposite airflow version, the FAN-7000-F. All fan modules and power supplies in a switch must move air in the same direction. Mixing directions causes the fans to work against each other and can lead to overheating.\u003c\/p\u003e\u003cp\u003eMatch the airflow to the rack layout, switches with ports in the cold aisle use front-to-back parts, and switches with ports in the hot aisle use back-to-front parts. Check the installed fans and supplies before ordering, and keep a spare on hand so a failed fan can be replaced quickly.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module-new\"\u003eFAN-7000-F fan module\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eThis FAN-7000-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":511887966214,"sku":"NSN-5950","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-FAN-7000-R-NOB.jpg?v=1686072422"},{"product_id":"dcs-7050q-16-r-arista-switch","title":"Arista DCS-7050Q-16-R 16x 40GB QSFP+ 8x 10GB SFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eSixteen 40GbE QSFP+ ports and eight 10GbE SFP+ ports make the DCS-7050Q-16-R a compact 40GbE aggregation switch in 1RU. Every QSFP+ port breaks out to four 10GbE links, giving up to 64 10GbE ports. Note that the eight SFP+ ports share capacity with two QSFP+ ports.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.28 Tbps at 960 Mpps. Latency runs 800 to 850 nanoseconds on QSFP+ and 800 to 1150 nanoseconds on SFP+, and packets share a 9 MB buffer. It has 4 GB of DRAM and 2 GB of flash.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so pick the direction the rack needs. Two 460W AC power supplies come installed in 1+1 hot-swap; replacements are PWR-460AC-R or PWR-460DC-R. Cooling is four hot-swap FAN-7000-R fans in N+1, and all fans and supplies must share the same airflow. Arista lists typical and maximum draw of 192W and 303W. The chassis is 19 x 16 x 1.75 inches and 18 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050q-16-f-arista-switch\"\u003eDCS-7050Q-16-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050q-16-r-arista-switch-new\"\u003eDCS-7050Q-16-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050Q-16-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":521051471878,"sku":"NSH-5864","price":646.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050Q-16-R.jpg?v=1686070619"},{"product_id":"dcs-7050t-64-f-arista-switch","title":"Arista DCS-7050T-64-F 48x 10GB Copper 4x 40GB QSFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050T-64-F is a 1RU copper top-of-rack switch from the original 7050 series. It has 48 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and four 40GbE QSFP+ uplinks. Breaking out the QSFP+ ports gives up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.28 Tbps at 960 Mpps. Arista lists latency of 3.3 microseconds on the RJ-45 ports and 950 to 1350 nanoseconds on the QSFP+ uplinks, with a 9 MB shared buffer. Memory is 4 GB of DRAM and 2 GB of flash, and a 50 GB SSD was offered on the -D variant.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC supplies run 1+1 hot-swap, with 460W spares listed as PWR-460AC-F and PWR-460DC-F. Four hot-swap FAN-7000-F fans run N+1. Use the same airflow on all fans and supplies. Typical and maximum draw are 322W and 422W. The switch measures 19 x 16 x 1.75 inches and weighs 20.9 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-r-arista-switch\"\u003eDCS-7050T-64-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-f-arista-switch-new\"\u003eDCS-7050T-64-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050T-64-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":807767146502,"sku":"NSH-6285","price":245.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-64-F-2.jpg?v=1781609133"},{"product_id":"dcs-7050sx-64-r-arista-switch-new","title":"NEW Arista DCS-7050SX-64-R 48x 10GB SFP+ 4x 40GB QSFP+ Back-to-Front Air Switch","description":"\u003cp\u003eA 7050X-generation top-of-rack switch, the DCS-7050SX-64-R puts 48 SFP+ ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks in 1RU. Breakout on the QSFP+ ports gives up to 64 10GbE ports in total.\u003c\/p\u003e\u003cp\u003eIt switches 1.28 Tbps at 960 Mpps with 550 nanoseconds of latency, lower than the earlier 7050S. A 12 MB shared buffer with dynamic allocation absorbs bursts. Memory is 4 GB of DRAM and 4 GB of flash, and an SSD was offered on a separate variant.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the direction that fits the rack. Two 500W AC power supplies run 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Fans and supplies must all share the same airflow. Typical and maximum draw are 140W and 220W. It weighs 19 lb and measures 19 x 16 x 1.75 inches. Ports for management are 10\/100\/1000 Ethernet, an RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-f-arista-switch-new\"\u003eDCS-7050SX-64-F\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-r-arista-switch\"\u003eDCS-7050SX-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-new\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module-new\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis DCS-7050SX-64-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":947339689990,"sku":"NSN-1706","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-64-R-new.jpg?v=1790349176"},{"product_id":"pwr-750ac-r-arista-power-supply","title":"Arista PWR-750AC-R 7050SX 750W AC B-F Airflow (Blue) Switch Power Supply","description":"\u003cp\u003eThe PWR-750AC-R is a spare 750W AC power supply for the Arista 7050SX-128 and the 7050TX-128 family of 2RU switches. These high-density 10G switches need more power than the 1RU 7050X models, and this supply is sized for them.\u003c\/p\u003e\u003cp\u003eInput is 100 to 240V AC, so the supply works from standard 120V outlets as well as high-line circuits. Arista rates efficiency at 94% typical, Platinum level.\u003c\/p\u003e\u003cp\u003eThis version moves air back-to-front (port-side exhaust). Arista also sells the opposite airflow version, the PWR-750AC-F. Match it to every fan module in the switch and to the rack's hot and cold aisles, because a supply moving air the wrong way works against the system fans.\u003c\/p\u003e\u003cp\u003eWith two supplies installed, one can be replaced while the other carries the load. Do not confuse it with the PWR-745AC supplies, which fit 7060X and 7280QR switches. Check the part number and airflow on the installed supply before ordering a spare.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-f-arista-power-supply\"\u003ePWR-750AC-F power supply\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-r-arista-power-supply-new\"\u003ePWR-750AC-R\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eBecause the unit is hot-swappable, you can replace a failed supply in a redundant pair without powering the switch down. Install it while the other supply carries the load, then confirm both supplies show as healthy.\u003c\/p\u003e\u003cp\u003eThis seller refurbished PWR-750AC-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":12332094128208,"sku":"NSH-5270","price":56.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-PWR-750AC-F_d1572a7b-d924-4d1c-8930-347dcf6317eb.jpg?v=1680296617"},{"product_id":"dcs-7050t-52-r-arista-switch","title":"Arista DCS-7050T-52-R 48x 10GB Copper 4x 10GB SFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eForty-eight 10GBASE-T RJ-45 ports at 1GbE or 10GbE and four 10GbE SFP+ uplinks make the DCS-7050T-52-R a full-rack copper access switch in 1RU. It is part of the original 7050 series.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.04 Tbps at 780 Mpps. Latency is 3.3 microseconds on copper and 800 to 1150 nanoseconds on the SFP+ uplinks, with a 9 MB shared buffer. It carries 4 GB of DRAM and 2 GB of flash; a 50 GB SSD was available on the -D variant.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so pick the one that fits the rack. Two AC power supplies come installed in 1+1 hot-swap, and 460W PWR-460AC-R and PWR-460DC-R are listed as spares. Four FAN-7000-R fans run N+1 and are hot-swap. All fans and supplies must share one airflow direction. Arista lists typical and maximum draw of 301W and 395W. It is 19 x 16 x 1.75 inches and 20.9 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-52-f-arista-switch\"\u003eDCS-7050T-52-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-52-r-arista-switch-new\"\u003eDCS-7050T-52-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050T-52-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":12674204794960,"sku":"NSH-7076","price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-52-R-2.jpg?v=1783409338"},{"product_id":"dcs-7050tx-48-f-arista-switch","title":"Arista DCS-7050TX-48-F 32x 10GB Copper 4x 40GB QSFP+ F-B Airflow Switch","description":"\u003cp\u003eThe DCS-7050TX-48-F is a 1RU 7050X copper switch with 32 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and four 40GbE QSFP+ uplinks. Breaking out the QSFP+ ports brings the total to as many as 48 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 960 Gbps at 720 Mpps, with 3 microseconds of latency. A 12 MB shared buffer uses dynamic buffer allocation. It has 4 GB of DRAM, 4 GB of flash, and an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 500W AC supplies run 1+1 hot-swap, with PWR-500AC-F and PWR-500-DC-F as spares. Four hot-swap FAN-7000-F fans provide N+1 cooling. Keep fans and supplies on the same airflow. Typical and maximum draw are 305W and 367W. The switch measures 19 x 16 x 1.75 inches and weighs 17 lb. Management is through a 10\/100\/1000 Ethernet port, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-48-r-arista-switch\"\u003eDCS-7050TX-48-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-48-f-arista-switch-new\"\u003eDCS-7050TX-48-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-48-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":12674792521808,"sku":"NSH-7072","price":185.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX-48-F-2_111245bd-1c47-4fc4-b571-ca54e0d6a651.jpg?v=1783438406"},{"product_id":"dcs-7050qx-32s-r-arista-switch-new","title":"NEW Arista DCS-7050QX-32S-R 32x 40GB QSFP+ 4x 10GB SFP+ Back-to-Front Air Switch","description":"\u003cp\u003eWith 32 QSFP+ ports at 40GbE and four 10GbE SFP+ ports, the DCS-7050QX-32S-R covers 40GbE spine or leaf duty in 1RU. Breakout cables extend it to as many as 96 10GbE ports, and the four SFP+ ports handle 10GbE links without consuming a QSFP+ port.\u003c\/p\u003e\u003cp\u003eThe switch delivers 2.56 Tbps and 1440 Mpps with 550 nanoseconds of latency. Its 12 MB shared buffer uses dynamic buffer allocation. The control plane has 4 GB of DRAM, 4 GB of flash, and an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the one that suits the rack. Two 500W AC supplies come installed in 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 150W and 302W. It is 19 x 16 x 1.75 inches and 20 lb, with a 10\/100\/1000 management port, RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-f-arista-switch-new\"\u003eDCS-7050QX-32S-F\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32s-r-arista-switch\"\u003eDCS-7050QX-32S-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-new\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module-new\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis DCS-7050QX-32S-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21283052716112,"sku":"NSN-1736","price":2262.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-DCS-7050QX-32S-R-new_3a3678f3-caaf-46dd-a074-de5c9a742375.jpg?v=1680288696"},{"product_id":"dcs-7050q-16-f-arista-switch","title":"Arista DCS-7050Q-16-F 16x 40GB QSFP+ 8x 10GB SFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050Q-16-F is a 1RU switch from the original 7050 series with 16 QSFP+ ports at 40GbE and eight 10GbE SFP+ ports. Breakout gives up to 64 10GbE ports. The SFP+ ports share capacity with two QSFP+ ports.\u003c\/p\u003e\u003cp\u003eSwitching capacity is 1.28 Tbps at 960 Mpps. Arista lists latency of 800 to 850 nanoseconds on the QSFP+ ports and 800 to 1150 nanoseconds on the SFP+ ports, with a 9 MB shared packet buffer. The control plane has 4 GB of DRAM and 2 GB of flash.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 460W AC supplies run 1+1 hot-swap, with PWR-460AC-F and PWR-460DC-F as spares, and four hot-swap FAN-7000-F fans run N+1. Use the same airflow on every fan and supply. Typical and maximum draw are 192W and 303W. The switch weighs 18 lb and measures 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050q-16-r-arista-switch\"\u003eDCS-7050Q-16-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050q-16-f-arista-switch-new\"\u003eDCS-7050Q-16-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-f-arista-power-supply-1\"\u003ePWR-460AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050Q-16-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21329705730128,"sku":"NSH-4195","price":361.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050Q-16-F-4.jpg?v=1782993865"},{"product_id":"dcs-7050sx-64-f-arista-switch","title":"Arista DCS-7050SX-64-F 48x 10GB SFP+ 4x 40GB QSFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050SX-64-F is a 1RU 7050X top-of-rack switch with 48 SFP+ ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks. With the QSFP+ ports broken out, it supports up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.28 Tbps at 960 Mpps, and latency drops to 550 nanoseconds compared with the earlier 7050S. The 12 MB shared buffer uses dynamic buffer allocation. It has 4 GB of DRAM and 4 GB of flash; an SSD was available on a separate variant.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. It ships with two 500W AC supplies in 1+1 hot-swap, and the spares are PWR-500AC-F and PWR-500-DC-F. Four hot-swap FAN-7000-F fans run N+1. Use one airflow direction across all fans and supplies. Arista lists typical and maximum draw of 140W and 220W. The switch is 19 x 16 x 1.75 inches and 19 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-r-arista-switch\"\u003eDCS-7050SX-64-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-64-f-arista-switch-new\"\u003eDCS-7050SX-64-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-64-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21329751900240,"sku":"NSH-7079","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-64-F_72d2aa1d-37b4-4f18-87ca-b4d3d5de9de7.jpg?v=1776381934"},{"product_id":"dcs-7050sx-72q-f-arista-switch","title":"Arista DCS-7050SX-72Q-F 48x 10GB SFP+ 6x 40GB QSFP+ Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050SX-72Q-F is a 1RU 7050X switch with 48 SFP+ ports at 1GbE or 10GbE and six 40GbE QSFP+ uplinks. Standard QSFP+ ports take ordinary optics and breakout cables, and the switch supports up to 72 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.44 Tbps at 1080 Mpps with 550 nanoseconds of latency. A 12 MB shared buffer uses dynamic buffer allocation. It has 4 GB of DRAM, 4 GB of flash, and an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 500W AC supplies run 1+1 hot-swap, with PWR-500AC-F and PWR-500-DC-F as spares. Four hot-swap FAN-7000-F fans provide N+1 cooling. Keep fans and supplies on one airflow direction. Typical and maximum draw are 144W and 261W. The switch is 19 x 16 x 1.75 inches and 17.3 lb. Management uses a 10\/100\/1000 Ethernet port, an RJ-45 RS-232 console, and two USB ports.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72q-r-arista-switch\"\u003eDCS-7050SX-72Q-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72q-f-arista-switch-new\"\u003eDCS-7050SX-72Q-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-72Q-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21329776115792,"sku":"NSH-7460","price":337.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-72Q-F.jpg?v=1783426732"},{"product_id":"dcs-7050sx2-128-r-arista-switch","title":"Arista DCS-7050SX2-128-R 96x 10GB SFP+ 8x 40GB QSFP+ Back-to-Front Air Switch","description":"\u003cp\u003eNinety-six SFP+ ports at 1GbE or 10GbE and eight 40GbE QSFP+ uplinks fit in the 2RU chassis of the DCS-7050SX2-128-R. It suits high-count 10GbE server access.\u003c\/p\u003e\u003cp\u003eThe switch handles 2.56 Tbps and 1440 Mpps, with 550 nanoseconds of latency and a 16 MB buffer. Memory is 8 GB of DRAM and 4 GB of flash, with no SSD option. For management it offers two 10\/100\/1000 Ethernet ports, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so pick the direction your rack uses. Two AC power supplies come installed in 1+1 hot-swap. PWR-500AC-R is the supported spare, and no DC supply is listed for this model. Four FAN-7002-R fans run N+1 and are hot-swap. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 214W and 396W. It weighs 33 lb at 19 x 18.1 x 3.5 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-f-arista-switch\"\u003eDCS-7050SX2-128-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-r-arista-switch-new\"\u003eDCS-7050SX2-128-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-r-arista-fan-module-3\"\u003eFAN-7002-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX2-128-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21873915592784,"sku":"NSH-8191","price":337.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-DCS-7050SX2-128-R_0a983c74-f0a4-446d-97f8-fd681ee4e173.jpg?v=1676312624"},{"product_id":"dcs-7050tx-48-r-arista-switch","title":"Arista DCS-7050TX-48-R 32x 10GB Copper 4x 40GB QSFP+ B-F Airflow Switch","description":"\u003cp\u003eThirty-two 10GBASE-T RJ-45 ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks make the DCS-7050TX-48-R a smaller-count copper option in the 7050X family. It fits in 1RU, and QSFP+ breakout extends it to as many as 48 10GbE ports.\u003c\/p\u003e\u003cp\u003eThe switch delivers 960 Gbps and 720 Mpps with 3 microseconds of latency. Its 12 MB shared buffer uses dynamic buffer allocation. Memory is 4 GB of DRAM and 4 GB of flash, and a 120 GB SSD is optional.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so confirm which way the rack runs. Two 500W AC power supplies come installed in 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. All fans and supplies should share one airflow direction. Arista lists typical and maximum draw of 305W and 367W. It weighs 17 lb at 19 x 16 x 1.75 inches, with a 10\/100\/1000 management port, RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-48-f-arista-switch\"\u003eDCS-7050TX-48-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-48-r-arista-switch-new\"\u003eDCS-7050TX-48-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-48-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21873994137680,"sku":"NSH-7071","price":185.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX-48-R_a23a1a77-c838-42b9-be79-53968636bb1c.jpg?v=1783432285"},{"product_id":"dcs-7050tx2-128-r-arista-switch","title":"Arista DCS-7050TX2-128-R 96x 10GB Copper 8x 40GB QSFP+ B-F Air Switch","description":"\u003cp\u003eSecond-generation hardware sets the DCS-7050TX2-128-R apart from the original 7050TX-128. The 2RU front panel still carries 96 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and eight 40GbE QSFP+ uplinks, while DRAM rises to 8 GB and the buffer to 16 MB.\u003c\/p\u003e\u003cp\u003eThe switch handles 2.56 Tbps and 1440 Mpps with 3 microseconds of latency. It has 4 GB of flash and no SSD option. Typical and maximum draw are 485W and 592W. For management there are two 10\/100\/1000 Ethernet ports, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so pick the direction your rack uses. Two 750W AC power supplies come installed in 1+1 hot-swap, together with two C13 to C14 power cords, and PWR-745AC-R is the spare. Four FAN-7002-R fans run N+1 and are hot-swap. All fans and supplies must share one airflow direction. It weighs 34.3 lb at 19 x 18.1 x 3.5 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx2-128-f-arista-switch\"\u003eDCS-7050TX2-128-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx2-128-r-arista-switch-new\"\u003eDCS-7050TX2-128-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-745ac-r-arista-power-supply-1\"\u003ePWR-745AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-r-arista-fan-module-3\"\u003eFAN-7002-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX2-128-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21877153431632,"sku":"NSH-7808","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX2-128-R-2.jpg?v=1783409612"},{"product_id":"dcs-7050tx-64-f-arista-switch","title":"Arista DCS-7050TX-64-F 48x 10GB Copper 4x 40GB QSFP+ Front-to-Back Air Switch","description":"\u003cp\u003eThe DCS-7050TX-64-F is a 1RU 7050X top-of-rack switch with 48 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and four 40GbE QSFP+ uplinks. With the QSFP+ ports broken out, it supports up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.28 Tbps at 960 Mpps, with 3 microseconds of latency and a 12 MB shared buffer using dynamic buffer allocation. It has 4 GB of DRAM, 4 GB of flash, and an optional 120 GB SSD.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 500W AC supplies run 1+1 hot-swap, and the spares are PWR-500AC-F and PWR-500-DC-F. Four hot-swap FAN-7000-F fans run N+1. Use one airflow direction across all fans and supplies. Arista lists typical and maximum draw of 315W and 387W. The switch is 19 x 15.8 x 1.75 inches and weighs 19 lb. Management uses a 10\/100\/1000 Ethernet port, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-64-r-arista-switch\"\u003eDCS-7050TX-64-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-64-f-arista-switch-new\"\u003eDCS-7050TX-64-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-64-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21877158019152,"sku":"NSH-7078","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX-64-F-2.jpg?v=1783409439"},{"product_id":"dcs-7050sx2-72q-f-arista-switch","title":"Arista DCS-7050SX2-72Q-F 48x 10GB SFP+ 6x 40GB QSFP+ Front-to-Back Air Switch","description":"\u003cp\u003eThe DCS-7050SX2-72Q-F is the second-generation version of the 7050SX-72Q. It keeps 48 SFP+ ports at 1GbE or 10GbE and six 40GbE QSFP+ uplinks in 1RU, supporting up to 72 10GbE ports, and enlarges the buffer to 16 MB.\u003c\/p\u003e\u003cp\u003eCapacity is 1.44 Tbps at 1080 Mpps with 550 nanoseconds of latency. It has 4 GB of DRAM, 4 GB of flash, and an optional 100 GB SSD. Arista lists typical and maximum draw of 127W and 251W.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. It ships with two 500W AC power supplies in 1+1 hot-swap and two C13 to C14 power cords. Spares are PWR-500AC-F and PWR-500-DC-F. Four hot-swap FAN-7000-F fans run N+1. Keep every fan and supply on the same airflow. The switch measures 19 x 16 x 1.75 inches and weighs 17.3 lb. Management is through a 10\/100\/1000 Ethernet port, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-72q-r-arista-switch\"\u003eDCS-7050SX2-72Q-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-72q-f-arista-switch-new\"\u003eDCS-7050SX2-72Q-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX2-72Q-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21891912400976,"sku":"NSH-8193","price":587.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7280QR-C36-M.jpg?v=1686072021"},{"product_id":"dcs-7050qx2-32s-f-arista-switch","title":"Arista DCS-7050QX2-32S-F 32x 40GB QSFP+ 4x 10GB SFP+ Front-to-Back Air Switch","description":"\u003cp\u003eThe DCS-7050QX2-32S-F is the second-generation version of the 7050QX-32S. It keeps the same 1RU layout of 32 QSFP+ ports at 40GbE and four 10GbE SFP+ ports, with breakout to as many as 96 10GbE ports, and doubles DRAM to 8 GB.\u003c\/p\u003e\u003cp\u003eThroughput is 2.56 Tbps at 1440 Mpps with 550 nanoseconds of latency. The packet buffer grows to 16 MB. Flash is 4 GB, and a 120 GB SSD was offered as an option. Power use is lower than the first version, with Arista listing typical and maximum draw of 129W and 283W.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two 500W AC supplies run 1+1 hot-swap, with PWR-500AC-F or PWR-500-DC-F as replacements, and four hot-swap FAN-7000-F fans run N+1. Use the same airflow on all fans and supplies. The switch weighs 20 lb and measures 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx2-32s-r-arista-switch\"\u003eDCS-7050QX2-32S-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx2-32s-f-arista-switch-new\"\u003eDCS-7050QX2-32S-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-f-arista-fan-module\"\u003eFAN-7000-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX2-32S-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":21910436872272,"sku":"NSH-8197","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX2-32S-F.jpg?v=1686070853"},{"product_id":"dcs-7050sx2-72q-r-arista-switch","title":"Arista DCS-7050SX2-72Q-R 48x 10GB SFP+ 6x 40GB QSFP+ Back-to-Front Air Switch","description":"\u003cp\u003eA second-generation 7050X switch, the DCS-7050SX2-72Q-R has 48 SFP+ ports at 1GbE or 10GbE and six 40GbE QSFP+ uplinks in 1RU. It supports up to 72 10GbE ports with breakout, and its buffer grows to 16 MB compared with the original 7050SX-72Q.\u003c\/p\u003e\u003cp\u003eThe switch delivers 1.44 Tbps and 1080 Mpps with 550 nanoseconds of latency. Memory is 4 GB of DRAM and 4 GB of flash, and a 100 GB SSD is optional. Typical and maximum draw are 127W and 251W.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the one that fits the rack. Two 500W AC supplies in 1+1 hot-swap are included, along with two C13 to C14 power cords; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. All fans and supplies should share one airflow direction. It is 19 x 16 x 1.75 inches and 17.3 lb, with a 10\/100\/1000 management port, RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-72q-f-arista-switch\"\u003eDCS-7050SX2-72Q-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-72q-r-arista-switch-new\"\u003eDCS-7050SX2-72Q-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX2-72Q-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28420990664784,"sku":"NSH-8194","price":606.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX2-72Q-R.jpg?v=1783427630"},{"product_id":"dcs-7050sx2-128-f-arista-switch","title":"Arista DCS-7050SX2-128-F 96x 10GB SFP+ 8x 40GB QSFP+ Front-to-Back Air Switch","description":"\u003cp\u003eThe DCS-7050SX2-128-F is a 2RU 7050X switch for dense 10GbE fiber access, with 96 SFP+ ports at 1GbE or 10GbE and eight 40GbE QSFP+ uplinks.\u003c\/p\u003e\u003cp\u003eCapacity is 2.56 Tbps at 1440 Mpps with 550 nanoseconds of latency and a 16 MB buffer. It has 8 GB of DRAM and 4 GB of flash; there is no SSD option. Two 10\/100\/1000 management ports, an RJ-45 RS-232 console, and a USB port handle out-of-band access.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC supplies run 1+1 hot-swap, and the supported spare is PWR-500AC-F; no DC supply is listed for this model. Four hot-swap FAN-7002-F fans run N+1. Keep fans and supplies on the same airflow. Typical and maximum draw are 214W and 396W. The chassis measures 19 x 18.1 x 3.5 inches and weighs 33 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-r-arista-switch\"\u003eDCS-7050SX2-128-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-f-arista-switch-new\"\u003eDCS-7050SX2-128-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-f-arista-fan-module-3\"\u003eFAN-7002-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX2-128-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28420990992464,"sku":"NSH-8190","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX2-128-F.jpg?v=1686071125"},{"product_id":"dcs-7050sx-96-f-arista-switch","title":"Arista DCS-7050SX-96-F 48x 10GB SFP+ 4x MXP Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050SX-96-F is a 1RU 7050X switch with 48 SFP+ ports at 1GbE or 10GbE and four MXP multi-speed ports. Using the MXP ports, it scales to 96 10GbE ports or twelve 40GbE ports. MXP cables or optics are needed to run the MXP ports at 40G or as 10G breakouts.\u003c\/p\u003e\u003cp\u003eArista rates it at 1.92 Tbps and 1.44 Bpps, with 550 nanoseconds of latency and a 12 MB packet buffer.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC supplies run 1+1 hot-swap, and PWR-500AC-F or PWR-500-DC-F are supported as spares. Fans are hot-swap with N+1 redundancy. Use the same airflow on all fans and supplies. Typical and maximum draw are 159W and 290W. The switch weighs 20.1 lb and measures 19 x 16 x 1.75 inches. Management is through Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-96-r-arista-switch\"\u003eDCS-7050SX-96-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-96-f-arista-switch-new\"\u003eDCS-7050SX-96-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-96-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28490634133584,"sku":"NSH-7462","price":705.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-DCS-7050SX-96-F_3cbe43ce-2e5e-4a57-b0ee-0689e0c25b15.jpg?v=1680288833"},{"product_id":"dcs-7050sx-72-r-arista-switch","title":"Arista DCS-7050SX-72-R 48x 10GB SFP+ 2x MXP Back-to-Front Airflow Switch","description":"\u003cp\u003eForty-eight 1\/10GbE SFP+ ports and two MXP multi-speed ports make up the front panel of the DCS-7050SX-72-R, a 1RU member of the 7050X family. Through the MXP ports it reaches a maximum of 72 10GbE ports, or six 40GbE ports. Plan for MXP cables or optics, which the MXP ports need for 40G or 10G breakout.\u003c\/p\u003e\u003cp\u003eArista rates the switch at 1.44 Tbps and 1.08 Bpps. Latency is 550 nanoseconds, and a 12 MB packet buffer is shared across ports.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so pick the direction the rack needs. Two AC supplies come installed in 1+1 hot-swap, and PWR-500AC-R or PWR-500-DC-R work as spares. The fans are hot-swap with N+1 redundancy. All fans and supplies should share one airflow direction. Typical and maximum draw are 144W and 276W. It is 19 x 16 x 1.75 inches and 19 lb, with Ethernet 100\/1000 management, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72-f-arista-switch\"\u003eDCS-7050SX-72-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72-r-arista-switch-new\"\u003eDCS-7050SX-72-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-72-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28490638360656,"sku":"NSH-7459","price":852.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-72-R-2.jpg?v=1783409201"},{"product_id":"dcs-7050sx-72-f-arista-switch","title":"Arista DCS-7050SX-72-F 48x 10GB SFP+ 2x MXP Front-to-Back Airflow Switch","description":"\u003cp\u003eThe DCS-7050SX-72-F is a 1RU 7050X switch with 48 SFP+ ports at 1GbE or 10GbE and two MXP multi-speed ports. Each MXP port runs as three 40GbE links or twelve 10GbE links, so the switch scales to 72 10GbE ports or 6x 40GbE on the MXP side. The MXP ports need MXP cables or optics for 40G or 10G breakout.\u003c\/p\u003e\u003cp\u003eCapacity is 1.44 Tbps at 1.08 Bpps, with 550 nanoseconds of latency and a 12 MB packet buffer.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC power supplies run 1+1 hot-swap, with PWR-500AC-F or PWR-500-DC-F supported as spares. Fans are hot-swap in an N+1 arrangement. Keep every fan and supply on the same airflow. Arista lists typical and maximum draw of 144W and 276W. The switch weighs 19 lb and measures 19 x 16 x 1.75 inches. Management is through Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72-r-arista-switch\"\u003eDCS-7050SX-72-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72-f-arista-switch-new\"\u003eDCS-7050SX-72-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-72-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28490689675344,"sku":"NSH-7458","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-72-F-2.jpg?v=1783409167"},{"product_id":"dcs-7050tx2-128-f-arista-switch","title":"Arista DCS-7050TX2-128-F 96x 10GB Copper 8x 40GB QSFP+ F-B Airflow Switch","description":"\u003cp\u003eThe DCS-7050TX2-128-F is the second-generation version of the 7050TX-128. It has 96 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and eight 40GbE QSFP+ uplinks in 2RU, with 8 GB of DRAM and a 16 MB buffer.\u003c\/p\u003e\u003cp\u003eCapacity is 2.56 Tbps at 1440 Mpps, with 3 microseconds of latency. Flash is 4 GB, and there is no SSD option. Arista lists typical and maximum draw of 485W and 592W, lower than the first-generation model. Two 10\/100\/1000 management ports, an RJ-45 RS-232 console, and USB handle out-of-band access.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. It ships with two 750W AC supplies in 1+1 hot-swap and two C13 to C14 power cords. Spares are PWR-745AC-F, with PWR-1900-DC-F for DC. Four hot-swap FAN-7002-F fans run N+1. Keep every fan and supply on the same airflow. The chassis measures 19 x 18.1 x 3.5 inches and weighs 34.3 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx2-128-r-arista-switch\"\u003eDCS-7050TX2-128-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx2-128-f-arista-switch-new\"\u003eDCS-7050TX2-128-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-745ac-f-arista-power-supply\"\u003ePWR-745AC-F power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-f-arista-fan-module-3\"\u003eFAN-7002-F fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX2-128-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":28865385005136,"sku":"NSH-8187","price":587.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX2-128-R-2_215832f1-343d-4956-b137-4ba5a255e65c.jpg?v=1783409645"},{"product_id":"dcs-7050sx-96-r-arista-switch","title":"Arista DCS-7050SX-96-R 48x 10GB SFP+ 4x MXP Back-to-Front Airflow Switch","description":"\u003cp\u003eWith 48 SFP+ ports at 1GbE or 10GbE plus four MXP multi-speed ports, the DCS-7050SX-96-R packs up to 96 10GbE ports, or twelve 40GbE ports, into 1RU. It belongs to the 7050X family. The MXP ports take MXP cables or optics for 40G operation or 10G breakout.\u003c\/p\u003e\u003cp\u003eThroughput is 1.92 Tbps at 1.44 Bpps. Latency is 550 nanoseconds, and a 12 MB packet buffer is shared across the ports.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so choose the one that fits the rack. Two AC power supplies are installed in 1+1 hot-swap, with PWR-500AC-R or PWR-500-DC-R as spares. The fans are hot-swap and run N+1. All fans and supplies should share one airflow direction. Arista lists typical and maximum draw of 159W and 290W. It is 19 x 16 x 1.75 inches and 20.1 lb. For management it has Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-96-f-arista-switch\"\u003eDCS-7050SX-96-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-96-r-arista-switch-new\"\u003eDCS-7050SX-96-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-96-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":29154585280592,"sku":"NSH-7463","price":705.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-DCS-7050SX-96-R_9cf10712-fcef-45a0-a9e6-d57839863043.jpg?v=1680288866"},{"product_id":"pwr-500-dc-f-arista-power-supply","title":"Arista PWR-500-DC-F 500W DC F-B Power Supply for 7050X 7280R 7280E 7060CX 7020R","description":"\u003cp\u003eThe PWR-500-DC-F is a spare 500W DC power supply for Arista 1RU switches in the 7050X, 7280R and 7060CX Series. It lets these switches run from a DC power plant in telecom, carrier and colocation sites where DC distribution is standard.\u003c\/p\u003e\u003cp\u003eInput is -48 to -60V DC. Older 7050X datasheets list the input as 40 to 72V DC. The supply does not accept AC input, so confirm the site's DC feed and breaker sizing before installing.\u003c\/p\u003e\u003cp\u003eThis version moves air front-to-back (port-side intake). Arista also sells the opposite airflow version, the PWR-500-DC-R. All fan modules and power supplies in the switch should move air in the same direction, matched to the rack's hot and cold aisles.\u003c\/p\u003e\u003cp\u003eArista rates efficiency at 90% typical. In a switch with two supplies installed, a failed unit can be replaced while the switch stays up on the other. Check the part number on the installed supply before ordering a spare so the input type and airflow both match.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500-dc-r-arista-power-supply\"\u003ePWR-500-DC-R power supply\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500-dc-f-arista-power-supply-new-1\"\u003ePWR-500-DC-F\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eBecause the unit is hot-swappable, you can replace a failed supply in a redundant pair without powering the switch down. Install it while the other supply carries the load, then confirm both supplies show as healthy.\u003c\/p\u003e\u003cp\u003eThis seller refurbished PWR-500-DC-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":29235811909712,"sku":"NSH-7509","price":1087.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-PWR-500DC_d7295192-bd22-4079-b217-e7591218a5f4.jpg?v=1680291081"},{"product_id":"dcs-7050qx2-32s-r-arista-switch","title":"Arista DCS-7050QX2-32S-R 32x 40GB QSFP+ 4x 10GB SFP+ Back-to-Front Air Switch","description":"\u003cp\u003eSecond-generation hardware sets the DCS-7050QX2-32S-R apart from the original 7050QX-32S. The front panel is unchanged, with 32 QSFP+ ports at 40GbE and four 10GbE SFP+ ports in 1RU, and breakout still reaches 96 10GbE ports. DRAM rises to 8 GB and the buffer to 16 MB.\u003c\/p\u003e\u003cp\u003eArista rates the switch at 2.56 Tbps and 1440 Mpps with 550 nanoseconds of latency. It carries 4 GB of flash, and an optional 120 GB SSD was available. Typical and maximum draw are 129W and 283W, below the first-generation model.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). Arista also sells a front-to-back (-F) version, so check the rack layout first. Two 500W AC supplies in 1+1 hot-swap are included; spares are PWR-500AC-R and PWR-500-DC-R. Four hot-swap FAN-7000-R fans provide N+1 cooling, and every fan and supply should match in airflow. It is 19 x 16 x 1.75 inches and weighs 20 lb. For management there is one 10\/100\/1000 Ethernet port, an RJ-45 console, and USB.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx2-32s-f-arista-switch\"\u003eDCS-7050QX2-32S-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx2-32s-r-arista-switch-new\"\u003eDCS-7050QX2-32S-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050QX2-32S-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":30322243567696,"sku":"NSH-8198","price":288.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX2-32S-R.jpg?v=1783207504"},{"product_id":"dcs-7050sx2-128-r-arista-switch-new","title":"NEW Arista DCS-7050SX2-128-R 96x 10GB SFP+ 8x 40GB QSFP+ B-F Airflow Switch","description":"\u003cp\u003eNinety-six SFP+ ports at 1GbE or 10GbE and eight 40GbE QSFP+ uplinks fit in the 2RU chassis of the DCS-7050SX2-128-R. It suits high-count 10GbE server access.\u003c\/p\u003e\u003cp\u003eThe switch handles 2.56 Tbps and 1440 Mpps, with 550 nanoseconds of latency and a 16 MB buffer. Memory is 8 GB of DRAM and 4 GB of flash, with no SSD option. For management it offers two 10\/100\/1000 Ethernet ports, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so pick the direction your rack uses. Two AC power supplies come installed in 1+1 hot-swap. PWR-500AC-R is the supported spare, and no DC supply is listed for this model. Four FAN-7002-R fans run N+1 and are hot-swap. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 214W and 396W. It weighs 33 lb at 19 x 18.1 x 3.5 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-f-arista-switch-new\"\u003eDCS-7050SX2-128-F\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx2-128-r-arista-switch\"\u003eDCS-7050SX2-128-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-new\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-r-arista-fan-module-new-2\"\u003eFAN-7002-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis DCS-7050SX2-128-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":30729531785296,"sku":"NSN-2438","price":3299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX2-128-R-new_713a29c3-99e7-4816-bb42-65714e56dc6d.jpg?v=1720999535"},{"product_id":"dcs-7050tx-96-r-arista-switch","title":"Arista DCS-7050TX-96-R 48x 10GB Copper 12x 40GB (4x MXP) B-F Air Switch","description":"\u003cp\u003eFour MXP multi-speed ports next to 48 10GBASE-T RJ-45 ports at 1GbE or 10GbE let the DCS-7050TX-96-R reach 96 10GbE ports, or twelve 40GbE ports, in 1RU. It is part of the 7050X family. Budget for MXP cables or optics, which the MXP ports require.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.92 Tbps at 1.44 Bpps. Latency is 3 microseconds, and a 12 MB packet buffer is shared. It has Ethernet 100\/1000 management, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so confirm which way the rack runs. Two AC power supplies are installed in 1+1 hot-swap, with PWR-500AC-R or PWR-500-DC-R as spares. The fans are hot-swap and run N+1. All fans and supplies should share one airflow direction. Typical and maximum draw are 355W and 455W. It weighs 23.1 lb and measures 19 x 20.6 x 1.75 inches, which is deeper than most 1RU switches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-96-f-arista-switch\"\u003eDCS-7050TX-96-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-96-r-arista-switch-new\"\u003eDCS-7050TX-96-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-96-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31269901762640,"sku":"NSH-7469","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX-96-R-2.jpg?v=1783409576"},{"product_id":"pwr-750ac-f-arista-power-supply-new","title":"NEW Arista PWR-750AC-F 7050SX Series 750W AC F-B Air (Red) Switch Power Supply","description":"\u003cp\u003eThe PWR-750AC-F is a spare 750W AC power supply for the Arista 7050SX-128 and the 7050TX-128 family of 2RU switches. These high-density 10G switches need more power than the 1RU 7050X models, and this supply is sized for them.\u003c\/p\u003e\u003cp\u003eInput is 100 to 240V AC, so the supply works from standard 120V outlets as well as high-line circuits. Arista rates efficiency at 94% typical, Platinum level.\u003c\/p\u003e\u003cp\u003eThis version moves air front-to-back (port-side intake). Arista also sells the opposite airflow version, the PWR-750AC-R. Match it to every fan module in the switch and to the rack's hot and cold aisles, because a supply moving air the wrong way works against the system fans.\u003c\/p\u003e\u003cp\u003eWith two supplies installed, one can be replaced while the other carries the load. Do not confuse it with the PWR-745AC supplies, which fit 7060X and 7280QR switches. Check the part number and airflow on the installed supply before ordering a spare.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-r-arista-power-supply-new\"\u003ePWR-750AC-R power supply\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-f-arista-power-supply\"\u003ePWR-750AC-F\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eBecause the unit is hot-swappable, you can replace a failed supply in a redundant pair without powering the switch down. Install it while the other supply carries the load, then confirm both supplies show as healthy.\u003c\/p\u003e\u003cp\u003eThis PWR-750AC-F is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31374586609744,"sku":"NSN-3229","price":423.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-PWR-750AC-F-new_c104f2e4-7493-4064-bfb1-2b7ca9148c6b.jpg?v=1676312938"},{"product_id":"dcs-7050qx-32-r-arista-switch-new","title":"NEW Arista DCS-7050QX-32-R 32x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eThirty-two 40GbE QSFP+ ports fill the front of the DCS-7050QX-32-R, a 1RU member of the 7050X family. Breakout cabling turns those into as many as 96 10GbE ports. There are no SFP+ ports on this model, which separates it from the 7050QX-32S.\u003c\/p\u003e\u003cp\u003eIt switches 2.56 Tbps at 1.44 Bpps, with latency of 550 nanoseconds and a 12 MB packet buffer. If you enable the 10GbE low-latency mode, eight QSFP+ ports are disabled. Memory is 4 GB of DRAM with 4 GB of flash, and an optional 100 GB SSD was available.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). Arista also sells a front-to-back (-F) version, so confirm the rack's direction before ordering. Power comes from two 460W AC supplies in 1+1 hot-swap. The 7050QX-32 uses a different supply from most other 1RU 7050X switches, and the spare part is PWR-460AC-R. Cooling is N+1 hot-swap with FAN-7000-R fans. All fans and supplies must match in airflow. For management there is Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-f-arista-switch-new\"\u003eDCS-7050QX-32-F\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050qx-32-r-arista-switch\"\u003eDCS-7050QX-32-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-new-2\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module-new\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis DCS-7050QX-32-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31374815821904,"sku":"NSN-2835","price":598.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050QX-32-R-new_4ad55f32-a870-4e03-ad4d-5e6a9a936380.jpg?v=1782660565"},{"product_id":"dcs-7050tx-96-f-arista-switch","title":"Arista DCS-7050TX-96-F 48x 10GB Copper 12x 40GB (4x MXP) F-B Air Switch","description":"\u003cp\u003eThe DCS-7050TX-96-F is a 1RU 7050X copper switch with 48 RJ-45 ports at 1GbE or 10GbE (10GBASE-T) and four MXP multi-speed ports. With the MXP ports in use it scales to 96 10GbE ports or twelve 40GbE ports. MXP cables or optics are needed on those ports.\u003c\/p\u003e\u003cp\u003eCapacity is 1.92 Tbps at 1.44 Bpps, with 3 microseconds of latency and a 12 MB packet buffer. Management is through Ethernet 100\/1000, an RS-232 console, and USB 2.0.\u003c\/p\u003e\u003cp\u003eThis unit is front-to-back (port-side intake). Arista also sells the opposite airflow version (-R), so match it to the rack. Two AC supplies run 1+1 hot-swap, and PWR-500AC-F or PWR-500-DC-F are supported as spares. Fans are hot-swap with N+1 redundancy. Use one airflow direction on every fan and supply. Arista lists typical and maximum draw of 355W and 455W. The chassis measures 19 x 20.6 x 1.75 inches, deeper than most 1RU models, and weighs 23.1 lb.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-96-r-arista-switch\"\u003eDCS-7050TX-96-R\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-96-f-arista-switch-new\"\u003eDCS-7050TX-96-F\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-f-arista-power-supply-4\"\u003ePWR-500AC-F power supply\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-96-F is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31562714775632,"sku":"NSH-7468","price":337.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-DCS-7050TX-96-F_f6e85af3-5ce7-406a-abfd-6a1bb96d3d19.jpg?v=1680289204"},{"product_id":"7000-rm-nt-rack-mount-kit-new","title":"For Arista NEW 7000-RM-NT 7048 7050 7124S 7148SX 7150 Rack Mount Bracket Kit","description":"\u003cp\u003eThe 7000-RM-NT is a rack mount bracket kit made by NetworkTigers to fit Arista 7048, 7050, 7124S, 7148SX and 7150S switches. It is not an Arista OEM part. Use it only with those exact models, since other Arista 1RU switches use different mounting hardware.\u003c\/p\u003e\u003cp\u003eThese are all 1RU fixed-configuration switches from Arista's earlier data center lines, and many of them reach the secondary market without their original accessory kit. The 7000-RM-NT gives you the hardware to put one into a standard 19-inch rack.\u003c\/p\u003e\u003cp\u003ePlan the installation before the switch goes in. Decide which side of the rack the ports should face, because that choice follows the airflow direction of the switch's fans and power supplies. A front-to-back switch draws air in on the port side and should face the cold aisle, and a back-to-front switch exhausts on the port side and should face the hot aisle. Arista's installation guides note that screws for fastening a switch to the rack posts are not part of its accessory kits, so have rack screws or cage nuts that match your rack on hand.\u003c\/p\u003e\u003cp\u003eIf you prefer the Arista OEM part, the \u003ca href=\"https:\/\/www.networktigers.com\/products\/kit-7000-arista-rack-mount-kit\"\u003eKIT-7000 Arista 1RU accessory kit\u003c\/a\u003e covers the 7150, 7048-A, 7050 and 7124SX. The \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7150s-24-f-arista-switch\"\u003eDCS-7150S-24-F 24-port 10G switch\u003c\/a\u003e is one of the switches this kit fits.\u003c\/p\u003e\u003cp\u003eThis 7000-RM-NT rack mount kit is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31751398326352,"sku":"NSH-1744","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/products\/arista-7000-RM-NT_ad56938e-c3fe-4b88-8089-277ba7e707cb.jpg?v=1676312520"},{"product_id":"dcs-7050tx-128-r-arista-switch","title":"Arista DCS-7050TX-128-R 96x 10GB Copper 8x 40GB QSFP+ B-F Airflow Switch","description":"\u003cp\u003eNinety-six 10GBASE-T RJ-45 ports at 1GbE or 10GbE and eight 40GbE QSFP+ uplinks fill the 2RU front panel of the DCS-7050TX-128-R. It is built for large groups of 10GBASE-T servers.\u003c\/p\u003e\u003cp\u003eThe switch handles 2.56 Tbps and 1.44 Bpps. Latency is 3 microseconds, and a 12 MB packet buffer is shared across ports. For management it has Ethernet, an RJ-45 RS-232 console, and USB.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version also exists, so pick the one that fits the rack. Power comes from two 750W AC supplies (PWR-745AC-R) in 1+1 hot-swap, not the 500W unit found in 1RU 7050X switches; PWR-1900-DC is the DC option. Four FAN-7002-R fans run N+1 and are hot-swap. All fans and supplies must share one airflow direction. Typical and maximum draw are 570W and 740W. It weighs 34 lb and measures 19 x 18.1 x 3.5 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-128-f-arista-switch\"\u003eDCS-7050TX-128-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050tx-128-r-arista-switch-new\"\u003eDCS-7050TX-128-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-745ac-r-arista-power-supply-1\"\u003ePWR-745AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7002-r-arista-fan-module-3\"\u003eFAN-7002-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050TX-128-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31954006999120,"sku":"NSH-7728","price":704.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050TX2-128-R-2_d222bcf3-16e3-43b4-8eaa-4bf8080f440b.jpg?v=1783409678"},{"product_id":"pwr-750ac-r-arista-power-supply-new","title":"NEW Arista PWR-750AC-R 7050SX 750W AC B-F Airflow (Blue) Switch Power Supply","description":"\u003cp\u003eThe PWR-750AC-R is a spare 750W AC power supply for the Arista 7050SX-128 and the 7050TX-128 family of 2RU switches. These high-density 10G switches need more power than the 1RU 7050X models, and this supply is sized for them.\u003c\/p\u003e\u003cp\u003eInput is 100 to 240V AC, so the supply works from standard 120V outlets as well as high-line circuits. Arista rates efficiency at 94% typical, Platinum level.\u003c\/p\u003e\u003cp\u003eThis version moves air back-to-front (port-side exhaust). Arista also sells the opposite airflow version, the PWR-750AC-F. Match it to every fan module in the switch and to the rack's hot and cold aisles, because a supply moving air the wrong way works against the system fans.\u003c\/p\u003e\u003cp\u003eWith two supplies installed, one can be replaced while the other carries the load. Do not confuse it with the PWR-745AC supplies, which fit 7060X and 7280QR switches. Check the part number and airflow on the installed supply before ordering a spare.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-f-arista-power-supply-new\"\u003ePWR-750AC-F power supply\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-750ac-r-arista-power-supply\"\u003ePWR-750AC-R\u003c\/a\u003e is also available.\u003c\/p\u003e\u003cp\u003eBecause the unit is hot-swappable, you can replace a failed supply in a redundant pair without powering the switch down. Install it while the other supply carries the load, then confirm both supplies show as healthy.\u003c\/p\u003e\u003cp\u003eThis PWR-750AC-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":31996596420688,"sku":"NSN-5273","price":1739.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-PWR-750AC-F-new.jpg?v=1686072735"},{"product_id":"dcs-7050sx-72q-r-arista-switch","title":"Arista DCS-7050SX-72Q-R 48x 10GB SFP+ 6x 40GB QSFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eSix 40GbE QSFP+ uplinks sit next to 48 SFP+ ports at 1GbE or 10GbE on the DCS-7050SX-72Q-R, a 1RU top-of-rack switch in the 7050X family. With QSFP+ breakout it supports as many as 72 10GbE ports, using standard optics and cables.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.44 Tbps and 1080 Mpps with 550 nanoseconds of latency. Its 12 MB shared buffer uses dynamic buffer allocation. Memory is 4 GB of DRAM and 4 GB of flash, and a 120 GB SSD is optional.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). Arista also sells a front-to-back (-F) version, so check the rack before ordering. Two 500W AC power supplies are installed in 1+1 hot-swap; spares are PWR-500AC-R and PWR-500-DC-R. Four FAN-7000-R fans run N+1 and are hot-swap. Every fan and supply must share one airflow direction. Arista lists typical and maximum draw of 144W and 261W. It weighs 17.3 lb and measures 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72q-f-arista-switch\"\u003eDCS-7050SX-72Q-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050sx-72q-r-arista-switch-new\"\u003eDCS-7050SX-72Q-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-500ac-r-arista-power-supply-4\"\u003ePWR-500AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050SX-72Q-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":32050985861200,"sku":"NSH-8108","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050SX-72Q-R-2.jpg?v=1783409238"},{"product_id":"dcs-7050t-64-r-arista-switch-new","title":"NEW Arista DCS-7050T-64-R 48x 10GB Copper 4x 40GB QSFP+ Back-to-Front Air Switch","description":"\u003cp\u003eWith 48 10GBASE-T RJ-45 ports at 1GbE or 10GbE and four 40GbE QSFP+ uplinks, the DCS-7050T-64-R pairs copper server access with 40GbE connections to the aggregation layer. It is a 1RU switch from the original 7050 series, and QSFP+ breakout supports up to 64 10GbE ports.\u003c\/p\u003e\u003cp\u003eThe switch moves 1.28 Tbps and 960 Mpps. Latency is 3.3 microseconds on copper and 950 to 1350 nanoseconds on QSFP+, with a 9 MB shared buffer. It has 4 GB of DRAM and 2 GB of flash; the -D variant added a 50 GB SSD.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so choose the direction your rack uses. Two AC power supplies are installed in 1+1 hot-swap; 460W PWR-460AC-R and PWR-460DC-R are listed as spares. Four FAN-7000-R fans run N+1, hot-swappable. Every fan and supply should share one airflow direction. Arista lists typical and maximum draw of 322W and 422W. It weighs 20.9 lb at 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-f-arista-switch-new\"\u003eDCS-7050T-64-F\u003c\/a\u003e with the opposite airflow. A seller refurbished \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-64-r-arista-switch\"\u003eDCS-7050T-64-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-new-2\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module-new\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis DCS-7050T-64-R is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":32144206102608,"sku":"NSN-2774","price":358.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-64-R-new.jpg?v=1794239721"},{"product_id":"dcs-7050t-36-r-arista-switch","title":"Arista DCS-7050T-36-R 32x 10GB Copper 4x 10GB SFP+ Back-to-Front Airflow Switch","description":"\u003cp\u003eThirty-two 10GBASE-T RJ-45 ports running at 1GbE or 10GbE, plus four 10GbE SFP+ uplinks, give the DCS-7050T-36-R a compact copper footprint in 1RU. It comes from the original 7050 series and lets servers connect over standard twisted-pair cabling.\u003c\/p\u003e\u003cp\u003eThe switch handles 720 Gbps and 540 Mpps. Latency is 3.3 microseconds on copper and 800 to 1150 nanoseconds on the SFP+ ports, and a 9 MB packet buffer is shared. It has 4 GB of DRAM and 2 GB of flash; no SSD is offered.\u003c\/p\u003e\u003cp\u003eAirflow is back-to-front (port-side exhaust). A front-to-back (-F) version is also sold, so confirm which way the rack runs. Two AC supplies come installed in 1+1 hot-swap, with 460W PWR-460AC-R and PWR-460DC-R listed as spares. Four FAN-7000-R fans run N+1 and are hot-swap. All fans and supplies should share one airflow direction. Arista lists typical and maximum draw of 244W and 289W. It weighs 18 lb at 19 x 16 x 1.75 inches.\u003c\/p\u003e\u003cp\u003eAdvanced Layer 3 features such as BGP and OSPF need an Arista Enhanced L3 license, which is not included and is available from Arista partners.\u003c\/p\u003e\u003cp\u003eArista also sells the \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-36-f-arista-switch\"\u003eDCS-7050T-36-F\u003c\/a\u003e with the opposite airflow. A new \u003ca href=\"https:\/\/www.networktigers.com\/products\/dcs-7050t-36-r-arista-switch-new\"\u003eDCS-7050T-36-R\u003c\/a\u003e is also available. Matching spares include the \u003ca href=\"https:\/\/www.networktigers.com\/products\/pwr-460ac-r-arista-power-supply-1\"\u003ePWR-460AC-R power supply\u003c\/a\u003e and the \u003ca href=\"https:\/\/www.networktigers.com\/products\/fan-7000-r-arista-fan-module\"\u003eFAN-7000-R fan module\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThis seller refurbished DCS-7050T-36-R is tested, working, and covered by the NetworkTigers one-year warranty.\u003c\/p\u003e","brand":"Arista","offers":[{"title":"Default Title","offer_id":32379937259600,"sku":"NSH-7068","price":197.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/files\/arista-DCS-7050T-36-R.jpg?v=1793970238"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0989\/9318\/collections\/arista-DCS-7050S-64-F.jpg?v=1682152178","url":"https:\/\/www.networktigers.com\/collections\/arista-7050-switches-refurbished-used-new.oembed?page=6","provider":"NetworkTigers","version":"1.0","type":"link"}