Cisco Firepower 8000 Firewalls - Refurbished, Used, New

Best Selling

Cisco Firepower 8000 Series appliances are the large modular next-generation IPS and firewall chassis that came out of the Sourcefire line, used at campus cores, data center edges and service provider peering points where many gigabits of traffic need intrusion inspection, application control and malware analysis. Unlike fixed firewalls, an 8000 Series chassis takes plug-in network modules (NetMods) for its copper and fiber interfaces, so one chassis can be fitted for 1G copper, 10G fiber or 40G fiber as the site requires. The unit on this page is the AMP8350-K9, the 8350 chassis with seven NetMod slots. NetworkTigers sells Firepower 8000 Series chassis and parts refurbished, used and new. Every unit is tested before it ships so it works when it arrives.

Firepower 8000 Series parts

Part	Used for	Shop
AMP8350-K9	Firepower 8350 chassis, 2U, seven NetMod slots, dual power supplies, for high-throughput inspection	AMP8350-K9
NetMod slots	Seven bays on the 8350 for copper and fiber network modules; the chassis ships with the NetMods stated in the listing	AMP8350-K9
Inline and passive deployment	Inline pairs on NetMod ports for IPS and firewall mode, or passive taps and SPAN feeds for detection only	AMP8350-K9
Management	Managed from a Firepower Management Center (FMC), physical or virtual; the chassis has no standalone GUI	AMP8350-K9
Stacking	Multiple 8350 chassis can be stacked to pool inspection capacity under one managed device	AMP8350-K9
Related Cisco security	Current Firepower fixed and modular firewall lines	Firepower 4100 \| Firepower 2100 \| All Cisco firewalls

Which Firepower 8000 chassis do I need?

Most buyers of an 8350 already run one and need a matching spare, a second unit for a high-availability pair, or a stack member to add capacity, so the first check is that the chassis, NetMods and Firepower software version line up with what you have in production. Confirm which NetMods are installed in the listing you choose and whether they are copper, 10G SR fiber or 40G, and whether they are fail-open (bypass) modules for inline use; a bare chassis has no traffic ports of its own. Check that your Firepower Management Center runs a release that still manages the 8000 Series and that it has device capacity for another appliance. Plan for two AC feeds; the chassis has redundant power supplies and the listing states how many are fitted. Software subscriptions for IPS rules, URL filtering and malware analysis are sold separately and are not included.

Frequently asked questions

Can a Firepower 8350 run Firepower Threat Defense (FTD)?
No. The 8000 Series runs the classic Firepower (Sourcefire) NGIPS software managed by FMC. FTD runs on the Firepower 1000, 2100, 4100 and 9300 lines.

Does the 8350 do NAT, VPN and routing like an ASA?
It does routed, switched and inline modes with basic NAT and access control, but it is built as an inspection appliance. Sites that need full firewall and VPN features usually pair it with an ASA or a Firepower 4100.

Is a used Firepower 8000 ready to register to my FMC?
Every chassis is tested with its installed NetMods before it ships. Register it to your own Firepower Management Center once it arrives; if it reports a prior registration, a factory reset from the console clears it, and we can walk you through that.

NetworkTigers has sold enterprise network equipment since 1996. Every chassis and part carries the NetworkTigers 365-day warranty. Need a specific NetMod loadout? Ask us for a quote.