Cart
Cisco Meraki MR36 / MR36H Access Points - Refurbished, Used, New
The Cisco Meraki MR36 and MR36H are Wi-Fi 6 (802.11ax) indoor access points managed from the Meraki cloud dashboard, each with a dedicated radio that scans full time for security threats and RF interference. The MR36 is a ceiling or wall AP for offices, schools, clinics and shops. The MR36H is the wall-plate version, with three Gigabit Ethernet ports for in-room devices in hotels, dormitories and apartments. NetworkTigers sells the MR36-HW and MR36H-HW refurbished, used and new, unclaimed so you can claim them into your own Meraki organization, tested by our technicians and backed by a 365-day warranty.
Key specifications
- Dual-band Wi-Fi 6: 2x2:2 on 2.4 GHz and 5 GHz, up to 1.5 Gbps combined radio rate
- Dedicated dual-band scanning radio for 24x7 WIDS/WIPS, spectrum analysis and location analytics
- Bluetooth Low Energy radio for beacons and BLE scanning
- MR36: one Gigabit Ethernet port; runs on standard 802.3af PoE (15 W maximum) or a 12 V DC adapter
- MR36H: one Gigabit uplink, three managed Gigabit wired access ports (one with 802.3af PoE output) and one unmanaged passthrough port; 802.3at PoE+ (30 W maximum) turns on the PoE output
- MR36 internal antennas: 5.4 dBi at 2.4 GHz, 6 dBi at 5 GHz
- Meraki license required, not included with the hardware
MR36 or MR36H?
- MR36: ceiling, wall or desk mount, one uplink, standard PoE. The general-purpose choice for offices and classrooms.
- MR36H: mounts over a compatible wall box and adds wired ports, for rooms with TVs, phones or other wired devices.
For an entry-level Wi-Fi 6 AP without a dedicated scanning radio, see the MR28. For 4x4 Wi-Fi 6 on 5 GHz and a 2.5 Gbps uplink, see the MR44. For the Wi-Fi 5 wall-plate model, see the MR30H.
Frequently asked questions
Can I use the MR36H's wired ports on a standard PoE switch?
Yes. On 802.3af the MR36H runs in low-power mode: Wi-Fi and the wired ports keep working, but the PoE output port stops supplying power. Use 802.3at PoE+ when a device in the room needs power from that port.
Which mounting kit fits?
We list the MA-MNT-MR-17 replacement kit for the MR36 on this page. The MR36H uses a different wall-plate mount, the MA-MNT-MR-H1A. Check each access point listing for the hardware included with it.
See all Meraki wireless access points, or ask us for a quote on larger quantities.
Cisco Meraki MR36-HW Wi-Fi 6 802.11ax Internal Antenna Unclaimed WAP w/ Mounts
$ 385.99
$ 459.99
Call if you need more
NEW Cisco Meraki MR36-HW Wi-Fi 6 802.11ax Internal Ant Unclaimed WAP w/ Mounts
$ 612.99
Call if you need more
NEW Cisco Meraki MR36H-HW Wi-Fi 6 802.11ax Wall Switch Unclaimed WAP w/ Mounts
$ 766.99
$ 789.99
Call if you need more
Cisco Meraki MA-MNT-MR-17 Mounting Kit for MR36 Series Access Point
$ 129.99
Call if you need more
Cisco Meraki MR36H-HW Wi-Fi 6 802.11ax Wall Switch Unclaimed WAP w/ Mounts
$ 646.99
$ 699.99
Call if you need more
NEW Cisco Meraki MA-MNT-MR-17 Mounting Kit for MR36 Series Access Point
$ 139.99
Call if you need more
