Cisco Meraki MR70 Outdoor Wireless Access Point - Refurbished, Used, New

Best Selling

The Cisco Meraki MR70 is an outdoor Wi-Fi 5 (802.11ac Wave 2) access point with internal antennas, managed from the Meraki dashboard. It is a dual-band 2x2:2 unit in a sealed, weather-rated housing, built to cover courtyards, parking areas, walkways, loading docks, playgrounds and building exteriors where a few dozen clients need reliable coverage rather than high density. NetworkTigers sells the MR70-HW refurbished, used and new, along with the MA-MNT-MR-13 mounting kit, and ships the access points with mounts as the listing states. Every unit is tested before it ships and arrives not associated with any other organization's Meraki dashboard, so you can claim it straight into yours. MR70 units keep working on the dashboard, we test this continuously to confirm it, and their low cost makes them a strong choice for outdoor coverage on a budget. Quantities of 50 and more are usually available.

MR70 access point and mounts

Item	Key spec	Shop
MR70-HW	Outdoor Wi-Fi 5 Wave 2 access point, Meraki dashboard managed	MR70-HW
Radios	Dual-band 2x2:2 on 2.4 GHz and 5 GHz with MU-MIMO	MR70-HW
Antennas	Internal omnidirectional, no external antennas to source or tune	MR70-HW
Uplink and power	One Gigabit RJ45 port, powered over Ethernet from a PoE switch or injector	MR70-HW
Housing	Sealed weather-rated enclosure for rain, dust and outdoor temperature swings	MR70-HW
MA-MNT-MR-13	Mounting kit for the MR70 series, pole and wall mounting	MA-MNT-MR-13
Related Cisco Meraki	Newer outdoor Wi-Fi 6 models and the full Meraki AP range	MR76 \| MR78 \| MR86 \| All Meraki APs

Which outdoor Meraki AP do I need?

Pick the MR70 when the job is coverage, not capacity: a patio, a gate, a yard, a car lot, or a link between the main building and an outbuilding where most clients are phones, scanners and tablets on Wi-Fi 5 or older. Its internal antennas give a wide omnidirectional pattern, so mount it high and central on a pole or wall. If you need a directional pattern to reach down a long alley or across a field, look at the MR76, which takes external antennas. If the site has many Wi-Fi 6 clients or you want more 5 GHz throughput, step up to the MR78 or MR86. Whichever you choose, plan a PoE switch port or injector within cable reach, an outdoor-rated Ethernet run, and the MA-MNT-MR-13 kit if the unit you buy does not list mounts as included.

Frequently asked questions

What does "unclaimed" mean on an MR70-HW listing?
The access point is not associated with any other organization's Meraki dashboard. You add the serial number to your own organization and the unit fetches its configuration on first boot. Listings marked Registrable / Unclaimed can be claimed this way; a listing marked Local Management Only cannot, and the product page states which applies. A Meraki license is required and is sold separately.

Does the MR70 need a surge protector or a special cable?
Use an outdoor-rated, shielded Ethernet cable and a grounded surge protector on any run that leaves the building. The access point itself is sealed, but the cable and the switch at the other end are the parts that lightning and static reach.

Can an MR70 mix with indoor Meraki access points in one network?
Yes. Indoor and outdoor Meraki access points sit in the same dashboard network, broadcast the same SSIDs and roam clients between each other, so the MR70 simply extends the network you already run outside.

NetworkTigers has sold enterprise network equipment since 1996. Every access point and mount carries the NetworkTigers 365-day warranty. Need a quantity for a campus or multi-site job? Ask us for a quote.