Cisco Meraki MS210 Switches - Refurbished, Used, New

Best Selling

Cisco Meraki MS210 switches are cloud-managed, stackable Layer 2 access switches for branch offices, schools and campus wiring closets. Each model has 24 or 48 Gigabit RJ45 ports, four 1G SFP uplinks, and two 40G QSFP+ stacking ports on the rear, and every setting from VLANs to port schedules is configured in the Meraki dashboard rather than at a console. The line covers data-only and PoE+ models so you can power phones, cameras and access points from the same closet switch. NetworkTigers sells MS210-24, MS210-24P, MS210-48, MS210-48LP and MS210-48FP switches, MA-CBL-40G stacking cables and replacement power supplies refurbished, used and new. Every unit is tested before it ships so it works when it arrives.

MS210 models and parts

Model or part	Used for	Shop
MS210-24-HW	24x 1G RJ45 data ports, 4x 1G SFP uplinks, no PoE	MS210-24-HW
MS210-24P-HW	24x 1G RJ45 PoE+ ports, 4x 1G SFP uplinks, 370W PoE budget	MS210-24P-HW
MS210-48-HW	48x 1G RJ45 data ports, 4x 1G SFP uplinks, no PoE	MS210-48-HW
MS210-48LP-HW	48x 1G RJ45 PoE+ ports, 4x 1G SFP uplinks, 370W PoE budget for lighter PoE loads	MS210-48LP-HW
MS210-48FP-HW	48x 1G RJ45 PoE+ ports, 4x 1G SFP uplinks, 740W PoE budget for full PoE+ on every port	MS210-48FP-HW
MA-CBL-40G-50CM	0.5 m 40G QSFP+ stacking cable for switches stacked directly above or below each other	MA-CBL-40G-50CM
MA-CBL-40G-1M	1 m 40G QSFP+ stacking cable, the usual choice for a closet stack	MA-CBL-40G-1M
MA-CBL-40G-3M	3 m 40G QSFP+ stacking cable for the return link at the top and bottom of a tall stack, or across racks	MA-CBL-40G-3M
PA-2511-1V1	Internal power supply used in the MS210-48LP and MS225-24P, per the listing	PA-2511-1V1
Related Cisco Meraki	Switches that stack with or sit above the MS210, and the optics for its SFP uplinks	MS225 \| MS250 \| MS120 \| All Meraki switches \| Meraki optics

Which MS210 do I need?

Count your PoE devices first. A closet with a handful of phones is fine on the 370W budget of the MS210-24P or MS210-48LP; a closet feeding Wi-Fi 6 access points, PTZ cameras or PoE+ displays on most ports needs the 740W MS210-48FP. If nothing needs power, the MS210-24 and MS210-48 cost less and run cooler. All five models share the same four 1G SFP uplinks, so if you need 10G uplinks look at the MS225 instead. Stacking cables are not included with the switch, so order one MA-CBL-40G cable per stack link, plus one more to close the ring, and pick the length by rack spacing. The listing states whether a switch is Registrable / Unclaimed or Local Management Only; a Registrable / Unclaimed unit is what you need to add it to your dashboard. A Meraki license is required and is sold separately.

Frequently asked questions

Can an MS210 stack with an MS225?
Yes. The MS210 and MS225 use the same 40G QSFP+ stacking ports and MA-CBL-40G cables and can be members of one physical stack, which is a common way to add 10G uplinks to a closet of MS210 switches. The MS250 uses the same cables but stacks only with other MS250 switches.

How many switches can be in one MS210 stack?
Up to eight MS210 and MS225 switches can share a stack, cabled in a ring so the stack keeps running if one cable or switch fails.

Does the MS210 route between VLANs?
It is a Layer 2 access switch with basic static routing. For a closet that needs full Layer 3 routing, OSPF or a larger routing table, move up to the MS250.

NetworkTigers has sold enterprise network equipment since 1996. Every switch and cable carries the NetworkTigers 365-day warranty. Building out a stack? Ask us for a quote.