The Arista AOC-S-S-25G-30M is a 30-meter 25 Gigabit SFP28 to SFP28 active optical cable. Arista's catalog describes it as a "SFP to SFP 25GbE Active Optical Cable". It is built on 850nm multimode fiber with the optics sealed into each connector, and Arista rates its maximum power at 1.0W.
It plugs into 25G SFP28 ports, and Arista sells it in lengths from 3 to 30 meters. Arista lists EOS 4.18.0 as the minimum software release.
If you need a different length, the shorter AOC-S-S-25G-10M 10m 25G SFP28 active optical cable is also available. For short runs inside a rack, the passive copper CAB-S-S-25G-3M 3m 25G SFP28 direct attach copper cable is an alternative with no optics in the link.
Label both ends when you install it so the run is easy to trace later, and keep the connectors capped until you are ready to plug them in.
Check that the ports at both ends of the link are set to the same speed before you connect it.
Because the fiber is fixed to the connectors, an active optical cable cannot be shortened or re-terminated, so choose a length that leaves a little slack for routing.
This seller refurbished AOC-S-S-25G-30M cable is tested, working, and covered by the NetworkTigers one-year warranty.
- Cable Type : Active Optical Cable
- Product Description : SFP to SFP 25GbE Active Optical Cable, 30 meters
- Cable Length : 30 meters
- Connector 1 : SFP28
- Connector 2 : SFP28
- Speed : 25 Gbps
- Model Number : AOC-S-S-25G-30M
- Part Number : AOC-S-S-25G-30M
- Condition : Seller refurbished
- One (1) Seller Refurbished Arista AOC-S-S-25G-30M 30m 25GB SFP28 Active Optical Cable as described above
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website