Cisco Meraki MT Environmental Sensors - Refurbished, Used, New

Best Selling

This collection carries the Cisco Meraki MT10-HW indoor temperature and humidity sensor, in new and refurbished or used condition. Refurbished and used units are tested before they ship. The MT10 is a battery-powered sensor managed from the Meraki dashboard, built for places like network closets where heat and humidity need watching. A Meraki license is required and is sold separately.

MT10-HW at a glance

Temperature: 0 to 55 °C (32 to 131 °F), accuracy ±0.3 °C.
Humidity: 0 to 95% RH, accuracy ±2.5% RH.
Power: two AA batteries, with Meraki rating battery life at up to five years. Meraki says to use alkaline batteries as replacements.
Radio: Bluetooth Low Energy (BLE 4.2).
Mounting: a backplate that attaches with screws, VHB tape or a magnet, with the sensor secured to the plate by a Torx security screw.

Shop the sensor: MT10-HW.

Does the MT10 connect to the network by itself?

No. The MT10 talks over BLE to a gateway, which is a compatible Meraki MR access point or MV camera on the same network. Meraki notes that without a working gateway nearby, the sensor uses battery power at a high rate while it searches for one. Plan for a compatible MR or MV device within range before installing.

What comes with a used MT10?

A new MT10-HW from Cisco ships with two AA batteries and the mounting hardware. For refurbished and used units, check the listing for included contents and registration state.

Does the MT10 take an external probe?

No. Meraki documents probe support on a separate model, the MT11, which this collection does not carry.

NetworkTigers has supplied enterprise networking equipment since 1996, and every purchase carries a 365-day warranty. For quantity pricing, ask us for a quote.