The Cisco A9K-4X100GE-TR is a 4-port 100GE line card for ASR 9000 Series routers. It fits a line card slot in the ASR 9006, ASR 9010, ASR 9904, ASR 9912 and ASR 9922, and Cisco places it in the third generation of ASR 9000 line cards.
Each port takes a CPAK optic, sold separately, and runs in 100GE, 40GE or 10GE mode with LAN, WAN and OTN support. All four ports run at 100 Gbps line rate without oversubscription. The -TR suffix marks the packet transport optimized version with basic QoS; the -SE service edge version adds enhanced QoS. The card requires Cisco IOS XR 5.3.1 or later (6.1.2 or later on 64-bit IOS XR). Cisco notes that the chassis may need a cooling and power hardware update for this card, and that it is not supported with the RSP440-LT route switch processor.
This listing ships one seller refurbished line card. Transceiver modules, manuals and software media are not included.
If you need twice the 100GE density, see the A9K-8X100GE-TR 8-port 100GE packet transport line card.
This seller refurbished Cisco A9K-4X100GE-TR line card is tested, working, and covered by the NetworkTigers one-year warranty.
- Module Type : Router Line Card
- Network Ports : 4x 100 Gigabit Ethernet CPAK
- Performance : 100 Gbps
- Designed For : Cisco ASR 9000 Router Series
- Model Number : A9K-4X100GE-TR
- Part Number : A9K-4X100GE-TR, A9K-4X100GE-TR=, A9K-4X100GE-TR-WS
- Condition : Seller refurbished
- One (1) Seller Refurbished Cisco A9K-4X100GE-TR 4x 100GB CPAK (Transport Optimized) Router Line Card as described above
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website - Transceiver Modules Not Included