The Cisco A9K-RSP440-LT is the Route Switch Processor 440 Lite for the ASR 9904, ASR 9006 and ASR 9010 routers. It installs in an RSP slot, and the chassis takes two RSPs for redundancy.
The Lite version gives 90 Gbps of fabric capacity per line card slot with a single RSP and 180 Gbps per slot with two. It carries 8 GB of ECC DRAM, a 16 GB SSD and 8 GB of eUSB storage. The front panel has 2x 100/1000BASE-T RJ45 management ports, console and auxiliary ports, 2x 10GE SFP+ cluster ports, an RJ45 IEEE 1588 port, USB, timing inputs and alarm outputs. Cisco rates the RSP 440 at 170 W typical, 450 W maximum, and 20 lb. It requires Cisco IOS XR 5.3.0 or later. Cisco states the Lite RSP does not support the A9K-8X100GE, A9K-4X100GE, A9K-24X10GE-1G or A9K-48X10GE-1G cards, or the MOD200 and MOD400 modular cards.
This listing ships one new open box RSP. To save with a seller refurbished unit, see the seller refurbished version of this RSP.
If you need more fabric capacity, see the A9K-RSP440-TR packet transport RSP 440, with 220 Gbps per slot on one RSP, 440 Gbps on two, and 6 GB of DRAM. For more memory, see the new A9K-RSP440-SE service edge RSP 440 with 12 GB. For the RSP 880 family, see the A9K-RSP880-LT-TR route switch processor.
This Cisco A9K-RSP440-LT route switch processor is new open box and covered by the NetworkTigers one-year warranty.
- Module Type : Route Switch Processor
- Network Ports : 2x 10 Gigabit Ethernet SFP+
- Management Ports : 1x RJ45 Management, 1x RJ45 Serial, 2x GE Management, 3x Management (alarm), 1x RS-232/422, 1x USB 2.0 Type A
- DRAM : Processor / Memory / Storage - 8 GB
- Flash : 1x 16 GB SSD - 8 GB eUSB
- Designed For : ASR 9000 Series
- Model Number : A9K-RSP440-LT
- Part Number : A9K-RSP440-LT, A9K-RSP440-LT=, A9K-RSP440-LT-WS
- Condition : New
- One (1) New Cisco A9K-RSP440-LT ASR 9000 Series 440 Route Switch Processor as described above