Cisco Meraki AC-MR-1-US Wireless Access Point (US) Power Adapter

The Cisco Meraki AC-MR-1-US is the AC power adapter for earlier Meraki MR access points, with a US plug. The existing listing shows an 18W rating at 12V and 1.5A, and the adapter carries the PA1015-2HU model number on its label. It lets an access point run from a wall outlet where no PoE switch or injector is available.

Meraki listed the AC-MR-1 for its earlier indoor access points, including the MR12, MR14, MR16, MR24, MR26, MR32, and MR34. Check the DC input rating printed on your access point before connecting any adapter, since newer Meraki APs use different power adapters and many have no DC jack at all.

A local adapter is handy for a lab bench, a temporary install, a desk-mounted AP in a small office, or an access point whose PoE port on the switch has failed. Regional versions exist for the EU, UK, and Australia; this is the US plug version.

Where the switch has no PoE, an injector is the other option: the MA-INJ-4-US 802.3at PoE+ injector powers an AP over its Ethernet cable from a single outlet. A wall mount for the MR32 is the MA-MNT-MR-6 mounting kit.

This seller refurbished Cisco Meraki AC-MR-1-US power adapter is tested, working, and covered by the NetworkTigers one-year warranty.