The Cisco C9400-SUP-1XL is Supervisor Engine-1XL for the Catalyst 9400 Series, which Cisco optimizes for the core and aggregation layers.
Per-slot bandwidth depends on the chassis: 240 Gbps in a C9404R, 120 Gbps in a C9407R and 80 Gbps in a C9410R, against 80 Gbps in every chassis for Supervisor-1. Uplinks are eight 1/10 Gigabit SFP/SFP+ ports and two 40 Gigabit QSFP+ ports. It has 16 GB DRAM and 10 GB flash, takes an optional M.2 SATA SSD of up to 960 GB, supports up to 64,000 MAC addresses and 144,000 IPv4 routes, and its hardware is capable of MPLS. Management ports are an RJ-45 console, a USB mini-B console, a 10/100/1000 RJ-45 Ethernet management port and a USB Type A host port. Minimum software is Cisco IOS XE 16.6.2 in the C9407R and C9410R and 16.9.1 in the C9404R.
This listing ships one new open box supervisor module.
For 25 Gigabit uplinks, see the Supervisor-1XL-Y module. For access-layer use at 80 Gbps per slot, see the seller refurbished Supervisor-1 module.
This Cisco C9400-SUP-1XL supervisor module is new open box and covered by the NetworkTigers one-year warranty.
- Bandwidth per slot : up to 240 Gbps (varies with chassis)
- Management Ports : 1x RJ45 console, 1x USB mini-B console, 1x 10/100/1000 RJ45 Ethernet management, 1x USB Type A host
- Min Firmware Required : Cisco IOS XE 16.6.2 (C9407R, C9410R), 16.9.1 (C9404R)
- Designed for : Cisco Catalyst 9400 Series
- DRAM : 16 GB
- Flash : 10 GB
- Hard Drive : Optional M.2 SATA SSD up to 960 GB (ordered separately)
- Per Slot Switching Capacity : 240 Gbps (Chassis C9404R), 120 Gbps (Chassis C9407R), 80 Gbps (Chassis C9410R)
- Model Number : C9400-SUP-1XL
- Part Number : C9400-SUP-1XL, C9400-SUP-1XL=, C9400-SUP-1XL-WS
- Condition : New
- One (1) NEW Cisco C9400-SUP-1XL Catalyst 9400 Switch Supervisor 1XL Module as described above