The Cisco PWR-C1-440WDC is a 440 W DC power supply for the Cisco Catalyst 3850 and 3650 Series. It runs from a -36 to -72 VDC source with a 16 to 8 A input current and delivers -56 V at 7.86 A. Like the AC modules, it fits either of the two rear bays, is hot-swappable, and weighs 2.6 lb.
Cisco offers it as a configuration option and as a spare for the 3850 models that use PWR-C1 supplies. On a 24-port PoE+ switch, one unit provides 220 W of PoE and two provide 660 W; on a 48-port PoE+ switch, the figures are 185 W and 625 W. The bays accept AC and DC supplies in any combination, so a DC module can back up an AC primary. For NEBS installations, Cisco specifies two DC modules, or one DC module with a blank cover.
A seller refurbished Cisco PWR-C1-440WDC is also available. For AC power, see the Cisco PWR-C1-715WAC 715 W power supply, and an unused bay takes the NEW Cisco PWR-C1-BLANK power supply cover. A typical host is the Cisco WS-C3850-24P-S 24-port PoE+ switch.
This Cisco PWR-C1-440WDC power supply is new and covered by the NetworkTigers one-year warranty. The original packaging may have been opened to inspect the contents.
- Power Capacity : 440 Watt
- Input Voltage : -36 to -72 VDC, 16 to 8 A
- Output : -56V at 7.86A
- Designed For : Catalyst 3850 and Catalyst 3650 Series
- Air Flow Direction : Catalyst 3850 Series Compatibility - All Models
- Catalyst 3650 Compatibility : All Models EXCEPT - WS-C3650-48FQM-S, WS-C3650-48FQM-E, WS-C3650-48FQM-L, WS-C3650-24PDM-E, WS-C3650-24PDM-S, WS-C3650-24PDM-L - These models have fixed PSU's.
- Model Number : PWR-C1-440WDC
- Part Number : PWR-C1-440WDC, PWR-C1-440WDC=, PWR-C1-440WDC-WS
- Condition : New
- One (1) NEW Cisco PWR-C1-440WDC 440W DC Power Supply for Catalyst 3850 and Catalyst 3650 as described above