Cart
The Cisco Meraki C9300-48P-M is a 1U Catalyst 9300-M switch managed from the Meraki Dashboard. It has 48 Gigabit RJ-45 ports with PoE+, and its uplinks come from one network module slot, so the same switch can uplink at 1, 10, 25, or 40 Gigabit depending on the module you install. Switching capacity is 256 Gbps with a 190.48 Mpps forwarding rate.
The default power supply is the PWR-C1-715WAC-P-M, which gives a 437W PoE budget; a second power supply raises it to 1,152W. A second hot-swap power supply slot is available for redundancy or more PoE, and cooling comes from three hot-swap FAN-T2-M fans.
Two dedicated stack ports provide 480 Gbps of stacking bandwidth, and up to eight switches can be managed as one stack with the STACK-T1-50CM-M, STACK-T1-1M-M, or STACK-T1-3M-M cables. StackPower can share power supply capacity across up to four switches using CAB-SPWR-30CM-M or CAB-SPWR-150CM-M cables. The chassis is 17.7 inches deep and weighs 16.7 lb with the default power supply.
For uplinks, the C9300-NM-8X-M 8x 10GB SFP+ module fits this switch. For 60W UPoE devices, see the C9300-48U-M, and for a 24-port closet, the C9300-24P-M. The switch is sold unclaimed, and Meraki cloud management requires a license, purchased separately.
This seller refurbished Cisco Meraki C9300-48P-M switch is tested, working, and covered by the NetworkTigers one-year warranty.
- Network Ports : 48x 1 Gigabit Ethernet PoE+ RJ-45
- Uplink Ports : Modular - one network module slot (module not included)
- Management Ports : 1x RS-232 RJ-45 console, 1x Gigabit Ethernet management, 1x USB 2.0
- Stacking Ports : 2x StackWise 480 ports, 2x StackPower connection ports
- Stacking Options : Stack Members - Up to eight switches can be connected in the stack | Supported stack members = Other C9300 SKUs with same license level - C9300 higher scale SKUs only stack with other like higher scale models
- Stacking Cable Options : Stackwise - STACK-T1-50CM-M, STACK-T1-1M-M, STACK-T1-3M-M | StackPower - CAB-SPWR-30CM-M, CAB-SPWR-150CM-M
- Module Slots : 1x Expansion Module Slot - Module not Included
- Module Options : C9300-NM-4G-M, C9300-NM-8X-M, C9300-NM-2Q-M, C9300-NM-4M-M, C9300-NM-2Y-M
- AirFlow Direction : Front-to-Back Airflow
- Fan Module Options : 3x FAN-T2-M Field Replaceable Fan Modules Included
- Power Supplies Included : 1x PWR-C1-715WAC-P-M Power Supply included - 2x Slots
- Power Supply Options : PWR-C1-715WAC-P-M, PWR-C1-350WAC-P-M, PWR-C1-1100WAC-P-M
- PoE Budget : 437W with default PSU - 787W (with 350W Secondary PS), 1152W (with 715W Secondary PS), 1440W (with 1100W Secondary PS)
- Switching Capacity : 256 Gbps (480 Gbps with Stacking)
- Forwarding Rate : 190.48 Mpps (547.62 Mpps with Stacking)
- MAC Address Table Size : 32,000
- Model Number : C9300-48P-M
- Part Number : C9300-48P-M
- Condition : Seller refurbished
- One (1) Seller Refurbished Cisco Meraki C9300-48P-M 48x 1GB PoE+ RJ45 1x Module Slot Unclaimed Switch as described above
- One (1) Power Cord Included
- One (1) AC Power Supply Included
- Three (3) Fan Modules Included
- One (1) Set of Rack Mount Brackets Included
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website - Transceiver Modules Not Included
- Network Modules Not Included
Customers who bought this item also viewed
Cisco C9300-NM-8X Catalyst 9300 Series 8x 10GB SFP+ Switch Module
Cisco PWR-C1-715WAC-P Catalyst 9300 715WAC Platinum Switch Power Supply
Cancellation / Withdrawal request
Please complete the form below to submit your withdrawal request under Article 9 of the EU Consumer Rights Directive.
