Cart
The Cisco Meraki CW9164I-MR is an indoor Wi-Fi 6E (802.11ax) access point in the Meraki cloud-managed version. It runs 2x2 on 2.4 GHz and 4x4 on both 5 GHz and 6 GHz, for a maximum PHY rate of 7.49 Gbps. Internal omnidirectional antennas give 3 dBi on 2.4 GHz, 5 dBi on 5 GHz, and 4 dBi on 6 GHz.
The uplink is one Multigigabit RJ-45 port at 100M, 1G, or 2.5G. On 802.3at PoE+ at 25W all radios run but the USB port is off; 802.3bt at 30W adds USB. 802.3af is for staging only, with the radios off, so plan PoE+ or better on the switch.
The 4x4 radios on 5 and 6 GHz make this a fit for offices, lecture rooms, and clinics with many clients per room. The 6 GHz band needs a Wi-Fi 6E or newer client. The unit is 9.5 inches square and weighs 3.5 lb.
For a smaller, lower-cost 2x2 option, see the CW9162I-MR. The CW9166I-MR adds a flexible XOR radio and a 5GB uplink, and the CW9172I (new) is a Wi-Fi 7 option. The access point is sold unclaimed; a Meraki license is required, purchased separately.
This seller refurbished Cisco Meraki CW9164I-MR access point is tested, working, and covered by the NetworkTigers one-year warranty.
- Wi-Fi Standard : Wi-Fi 6E (IEEE 802.11a/b/g/n/ac/ax)
- Managed By : Cloud Managed - Pairing the Cisco Catalyst 9164 Series Access Points with the Meraki cloud platform gives organizations a unified IT experience
- Licensing : Licence is not included, these can be purchased directly from Meraki. This unit is unclaimed
- Suggested Use : Indoor - It's designed for next-generation deployments in offices, schools, hospitals, retail shops, and hotels, offering high throughput, enterprise-grade security, and simple management
- Region : US
- Radios : 1x 2.4 GHz 802.11b/g/n/ax client access radio, 1x 5 GHz 802.11a/n/ac/ax client access radio, 1x 6 GHz 802.11ax client access radio, 1x 2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, and location analytics radio
- Spatial Streams per Radio : 2.4 GHz = 2, 5 GHz = 4, 6 GHz = 4
- Maximum Data Rate : 7.49 Gbps (Aggregate, Tri-band)
- Bluetooth / IoT Radios : An integrated Bluetooth radio provides seamless deployment of Bluetooth Low Energy beacon functionality and effortless visibility of Bluetooth devices
- PoE Standard : The CW9164I-MR is powered via 802.3bt UPOE (42.5 to 57V) or PoE+ 802.3at - PoE injector (MA-INJ-6) sold separately
- DC Power Input : 54V DC input - DC adapter (MA-PWR-50WAC) sold separately.
- Uplink Ports : 1x 100M/1000M/2.5G BASE-T Ethernet RJ-45
- Other Ports : 1x USB 2.0 Type-A (4.5W power budget)
- Antenna Type : Integrated omnidirectional antennas, 3 dBi at 2.4 GHz, 5 dBi at 5 GHz, 4 dBi at 6 GHz
- Antenna Ports : No external antenna ports - integrated omnidirectional antennas only
- Mounting Options : Ceiling, Wall Mount. All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2). Compatible with AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2. Ceiling tile rail support for 9/16, 15/16, or 1.5 in. flush or recessed rails
- Mounts Included : AIR-AP-BRACKET-2 Included
- Model Number : CW9164I-MR
- Part Number : CW9164I-MR
- Condition : Seller refurbished
- One (1) Seller Refurbished Cisco Meraki CW9164I-MR Wi-Fi 6E 802.11ax Int Ant HP Unclaimed WAP as described above
- One (1) AIR-AP-BRACKET-2 Mount Included
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website - Power Adapter Not Included
- Power Injector Not Included
Customers who bought this item also viewed
Cancellation / Withdrawal request
Please complete the form below to submit your withdrawal request under Article 9 of the EU Consumer Rights Directive.
