The Juniper EX4100-F-48P is a 48-port PoE+ access switch from the fixed-configuration EX4100-F line. Its 48 RJ45 ports run at 10/100/1000 Mbps with up to 30W per port and a 740W total PoE budget for phones, cameras and access points.
Power and cooling are built in: an 850W AC supply and two internal fans moving air front-to-back, in at the port side and out the rear. Because the supply is fixed, the PoE budget stays at 740W.
The switch carries eight SFP+ ports. Four are 1/10GB uplinks, and four more 10GB ports serve as Virtual Chassis links for stacks of up to 10 members or as extra uplinks. Switching capacity is 128 Gbps unidirectional (256 Gbps bidirectional) at 190 Mpps, the MAC table holds 64,000 entries, and the system has 4GB of DRAM with ECC. Management uses an RJ45 port, with RJ45 and USB-C consoles.
This listing ships with a power cord and a set of rack mount brackets; the power supply and fans are internal to the chassis.
If you want a second hot-swappable supply and 25GB stacking, look at the modular EX4100-24P 24x 1GB PoE+ switch. For 90W PoE ports and an expansion slot, the EX4400-48P 48x 1GB PoE++Type4 switch is the step up.
This seller refurbished Juniper EX4100-F-48P switch is tested, working, and covered by the NetworkTigers one-year warranty.
- Network Ports : 48x 1 Gigabit Ethernet PoE+ RJ45
- Uplink Ports : 4x 10GB SFP+ (1/10GB)
- Management Ports : 1x RJ45 Console, 1x USB-C Console, 1x RJ45 Management
- Stacking Ports : 4x 10GB SFP+ Virtual Chassis Ports (configurable as uplinks)
- Stacking Options : Virtual Chassis, up to 10 members
- AirFlow Direction : Front-to-back (port-side intake)
- Fan Module Options : None, 2x built-in fans
- Power Supplies Included : 1x 850W AC power supply, built in (not field-replaceable)
- PoE Budget : 740W
- Switching Capacity : 128 Gbps (unidirectional) / 256 Gbps (bidirectional)
- Forwarding Rate : 190 Mpps
- MAC Address Table Size : 64,000
- DRAM and Flash : 4GB DRAM with ECC, 8GB storage
- Model Number : EX4100-F-48P
- Part Number : EX4100-F-48P
- Condition : Seller refurbished
- One (1) Seller refurbished Juniper EX4100-F-48P 48x 1GB PoE+ RJ45 4x 10GB SFP+ 4x 10GB SFP+ VC Switch as described above
- One (1) Power Cord Included
- One (1) Set of Rack Mount Brackets Included
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website - Transceiver Modules Not Included