The Cisco Meraki MA-ANT-3-F6 is an indoor dual-band narrow patch antenna with 6 RP-TNC leads, one for each antenna port on a 6-port Meraki external-antenna access point. Gain is 11.2 dBi on 2.4 GHz and 10.8 dBi on 5 GHz, with a narrow 30-degree beam both horizontally and vertically.
A narrow patch concentrates the signal into a tight cone, so one access point can reach far down a long space. Typical uses are warehouse aisles between tall racks, long corridors, and the far end of an arena or auditorium, where a ceiling omni would spread signal into areas that do not need it.
The antenna mounts on a wall or pole with the MA-MNT-ANT-1 standard or MA-MNT-ANT-2 extra-long articulating arm, sold separately, which sets the aim in 5-degree steps. Every port on the access point needs an antenna, so the five-port sets go on the five-port MR42E and the six-port sets on the MR46E and MR53E.
It connects to the MR46E-HW or the MR53E-HW. For a wider beam, see the MA-ANT-3-E6 wide patch, and for all-around coverage, the MA-ANT-3-A6 dipole six-pack.
This seller refurbished Cisco Meraki MA-ANT-3-F6 antenna is tested, working, and covered by the NetworkTigers one-year warranty.
- Type : Indoor dual-band narrow patch - 30 x 30 degree beam
- Connector : 6x RP-TNC
- Gain : 11.2 dBi (2.4 GHz) / 10.8 dBi (5 GHz)
- Frequency Range : 2.400-2.500 GHz, 5.150-5.875 GHz
- Designed For : Indoor Meraki external-antenna access points (6x RP-TNC)
- Compatible With : MR46E, MR53E - MA-MNT-ANT-1 or MA-MNT-ANT-2 arm, not included
- Model Number : MA-ANT-3-F6
- Part Number : MA-ANT-3-F6
- Condition : Seller refurbished
- One (1) Seller refurbished Cisco Meraki MA-ANT-3-F6 6 Port Narrow Patch Antenna for MR53E and MR46E as described above
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website