Cart
The Cisco Meraki MS125-48FP-HW is a 48-port 1U PoE+ access switch managed from the Meraki Dashboard. It has 48 Gigabit RJ-45 ports with PoE+ and four 10 Gigabit SFP+ uplinks, with 176 Gbps of switching capacity. A dedicated management port gives access to the local status page.
The PoE budget is 740W, enough for 24 devices at the full 30W PoE+ or all 48 ports at 15.4W PoE. That suits closets full of access points, phones, and cameras, and the 10 Gigabit uplinks carry the traffic from Wi-Fi 6 and Wi-Fi 6E access points. The power supply is fixed and internal. The 1U chassis measures 17.32 x 13.38 x 1.73 inches and weighs 12.79 lb.
The MS125 series does not stack physically. Virtual stacking in the Dashboard lets you change port settings across many switches at once, so a site with several closets is still run as one network from the cloud.
If fewer ports need power, the MS125-48LP-HW with 370W PoE+ is the lower-budget option. For 1 Gigabit uplinks at a lower cost, see the MS120-48FP-HW, and for short fiber uplinks, the MA-SFP-10GB-SR multimode SFP+. The switch is sold unclaimed; a Meraki license is required, purchased separately.
This seller refurbished Cisco Meraki MS125-48FP-HW switch is tested, working, and covered by the NetworkTigers one-year warranty.
- Network Ports : 48x 1 Gigabit Ethernet PoE+ RJ45 with auto negotiation and crossover detection (auto-MDIX)
- Uplink Ports : 4x 10 Gigabit Ethernet SFP+
- Management Ports : 1x RJ45 Management port
- Stacking Ports : None
- Stacking Options : Virtual stacking in the Meraki Dashboard only - no physical stacking
- Power Supplies Included : 1x AC Internal Power Supply
- PoE Budget : 740W - up to 24 ports at 30W PoE+ or 48 ports at 15.4W PoE
- Switching Capacity : 176 Gbps
- Forwarding Rate : 130 Mpps
- MAC Address Table Size : 32,000
- Model Number : MS125-48FP-HW
- Part Number : MS125-48FP-HW, MS125-48FP-HW=, MS125-48FP-HW-WS
- Condition : Seller refurbished
- One (1) Seller Refurbished Cisco Meraki MS125-48FP-HW 48x 1GB PoE+ (740W) 4x 10GB SFP+ Unclaimed Switch as described above
- One (1) Power Cord Included
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer\'s website or the web. Software or firmware updates may be available through the manufacturer\'s website - Licenses are sold directly by Meraki
Customers who bought this item also viewed
Cancellation / Withdrawal request
Please complete the form below to submit your withdrawal request under Article 9 of the EU Consumer Rights Directive.
