The Cisco Meraki MS120-8FP-HW is a compact 8-port PoE+ access switch managed from the Meraki Dashboard. It has eight Gigabit RJ-45 ports with PoE+ and two 1 Gigabit SFP uplinks, with 20 Gbps of switching capacity. There is no dedicated management port; setup and monitoring run from the cloud.
The PoE budget is 124W, enough for four devices at the full 30W PoE+ or all eight ports at lower draw. Unlike the smaller 8-port models, the power supply is fixed and internal, so there is no external brick to lose. The chassis measures 9 x 8.58 x 1.75 inches and weighs 3.42 lb.
The MS120 series does not stack physically. Virtual stacking in the Dashboard lets you change port settings across many switches at once, so a site with several closets is still run as one network from the cloud. Typical uses are a small branch with several access points, a camera cluster, or a classroom with phones and wireless on the same switch.
For fewer PoE devices, the MS120-8LP-HW with 67W PoE+ is the lower-power option. When eight ports are not enough, the MS120-24P-HW 24-port PoE+ switch is the next size up, and the MA-SFP-1GB-SX multimode SFP fits the uplinks. The switch is sold unclaimed; a Meraki license is required, purchased separately.
This seller refurbished Cisco Meraki MS120-8FP-HW switch is tested, working, and covered by the NetworkTigers one-year warranty.
- Network Ports : 8x 1 Gigabit Ethernet PoE+ RJ45
- Uplink Ports : 2x 1 Gigabit Ethernet SFP
- Management Ports : None - configured and monitored from the Meraki Dashboard
- Stacking Ports : None
- Stacking Options : Virtual stacking in the Meraki Dashboard only - no physical stacking
- Fan Module Options : Fanless Operation
- Power Supplies Included : 1x Fixed internal AC power supply
- PoE Budget : 124W
- Switching Capacity : 20 Gbps
- Forwarding Rate : 14.88 Mpps
- MAC Address Table Size : 16,000
- Model Number : MS120-8FP-HW
- Part Number : MS120-8FP-HW, MS120-8FP-HW=, MS120-8FP-HW-WS
- Condition : Seller refurbished
- One (1) Seller Refurbished Cisco Meraki MS120-8FP-HW 8x 1GB PoE+ (124W) RJ45 2x 1GB SFP Unclaimed Switch as described above
- One (1) Power Cord Included
- Manuals or product brochures are not included. Software or Firmware DVDs or CDs are not included
Product information and installation instructions may be found on the manufacturer's website or the web. Software or firmware updates may be available through the manufacturer's website - Transceiver Modules Not Included
- Licenses are sold directly by Meraki